Am I missing something from my gear selector
#1
Scooby Regular
Thread Starter
Am I missing something from my gear selector
I’ve done my gearbox conversion. I was given a selector to go with the box I’ve fitted it but feel something is missing. The stabiliser rod bolts to the car and then I’ve got a black rubber shroud if you like. If I was to peel it back I would be able to see the Propshaft.
#2
Scooby Regular
There is usually a metal plate (35038AE070) that bolts on top of the rubber boot to keep it sealed.
An insulator (90815AE511) plus clamps 35057AE000) and inner rubber gaiter (35016AE040)
You then have the stick leather gaiter and your replacement MT centre console front cover.
94110AE270
An insulator (90815AE511) plus clamps 35057AE000) and inner rubber gaiter (35016AE040)
You then have the stick leather gaiter and your replacement MT centre console front cover.
94110AE270
Last edited by Don Clark; 28 October 2019 at 07:33 PM.
#5
Scooby Regular
They are all listed on subaru Dealer sites in the US so yes.
You'd have to ask a Dealer or look for a B12 gen3 (MY99-MY03) manual being broken.
The only common item listed are the 2 clamps for the inner rubber gaiter attaching it to the metal plate
You'd have to ask a Dealer or look for a B12 gen3 (MY99-MY03) manual being broken.
Are the metal trim and rubber boot off the Impreza the same
Last edited by Don Clark; 28 October 2019 at 07:42 PM.
#6
Scooby Regular
Trending Topics
#8
Scooby Regular
#10
Scooby Regular
Thread
Thread Starter
Forum
Replies
Last Post
Carlh
ScoobyNet General
4
10 October 2010 01:58 PM