PC stability issues
#1
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Jun 2001
Location: Northampton, Xbox GamerTag - Neanderthal1976
Posts: 6,850
Likes: 0
Received 0 Likes
on
0 Posts
PC stability issues
Months ago I built my own PC based on an overclocked bundle from Scan.
All was well initially but I've been getting more and more frequent BSOD happening.
I did think perhaps as the case has acoustic insulation (pre-installed on the case) that it may be over heating so I added a 140mm fan to the side (extracting).
I thought this had done the trick and went 2 weeks without a crash but today it's done it twice.
I've got the .dmp file windows creates but opening it in notepad doesn't make any sense, wordwrap or not lol
I've decided to try flipping the 140mm fan round so it's sucking air in, see if that makes any difference.
PC specs are i7-2600K @ 3.40Ghz
GTX 560ti @ 861MHz
8Gb ram
Win 7 64bit.
I've not added any hardware since building it. All drivers up to date too.
Need this PC for work and Scan just say to send the motherboard and CPU back for them to test which can take 7-10 working days....
Matt
All was well initially but I've been getting more and more frequent BSOD happening.
I did think perhaps as the case has acoustic insulation (pre-installed on the case) that it may be over heating so I added a 140mm fan to the side (extracting).
I thought this had done the trick and went 2 weeks without a crash but today it's done it twice.
I've got the .dmp file windows creates but opening it in notepad doesn't make any sense, wordwrap or not lol
I've decided to try flipping the 140mm fan round so it's sucking air in, see if that makes any difference.
PC specs are i7-2600K @ 3.40Ghz
GTX 560ti @ 861MHz
8Gb ram
Win 7 64bit.
I've not added any hardware since building it. All drivers up to date too.
Need this PC for work and Scan just say to send the motherboard and CPU back for them to test which can take 7-10 working days....
Matt
#3
For random BSODs I would always check the memory and hard disk first.
For memory use Memtestx86+ and for the hard drive use something like the IBM-Hitachi Drive fitness test or chkdsk which might be easier.
To test the temperature theory, either run the PC in the open with the lid off or download a temperature monitoring tool, run it for a while and see if it starts getting hot.
For memory use Memtestx86+ and for the hard drive use something like the IBM-Hitachi Drive fitness test or chkdsk which might be easier.
To test the temperature theory, either run the PC in the open with the lid off or download a temperature monitoring tool, run it for a while and see if it starts getting hot.
#4
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
Download and run memtest, you will see in minutes if it's an issue, I would also try reseating and cleaning the connectors and check the mobo for updates, especially if it's a z68 chipset
Tony
Tony
Last edited by TonyBurns; 23 August 2012 at 07:48 PM.
#5
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Jun 2001
Location: Northampton, Xbox GamerTag - Neanderthal1976
Posts: 6,850
Likes: 0
Received 0 Likes
on
0 Posts
yeah it's a z68 motherboard.
Will run that test as well. Interestingly since reversing that fan it hasn't crashed. Although that doesn't mean it won't at any minute lol
Will run that test as well. Interestingly since reversing that fan it hasn't crashed. Although that doesn't mean it won't at any minute lol
#6
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
SSD drive and z68? id bet the bios needs upgrading, had the same problem with mine when they came out, bsod/random crashes, upgraded the bios and not had a problem since
Tony
Tony
Trending Topics
#9
Moderator
iTrader: (1)
The Force 3 does have quite a bad reputation for BSODs - even the post recall models.
Still, need to rule the RAM first.
Oh yeah, My PC runs hotter with the covers removed (it needs the case fans to keep the passively cooled parts cool, like the HDs, SSD, RAM and Mobo chipset).
Still, need to rule the RAM first.
Oh yeah, My PC runs hotter with the covers removed (it needs the case fans to keep the passively cooled parts cool, like the HDs, SSD, RAM and Mobo chipset).
Last edited by ALi-B; 23 August 2012 at 11:26 PM.
#10
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Jun 2001
Location: Northampton, Xbox GamerTag - Neanderthal1976
Posts: 6,850
Likes: 0
Received 0 Likes
on
0 Posts
The Force 3 does have quite a bad reputation for BSODs - even the post recall models.
Still, need to rule the RAM first.
Oh yeah, My PC runs hotter with the covers removed (it needs the case fans to keep the passively cooled parts cool, like the HDs, SSD, RAM and Mobo chipset).
Still, need to rule the RAM first.
Oh yeah, My PC runs hotter with the covers removed (it needs the case fans to keep the passively cooled parts cool, like the HDs, SSD, RAM and Mobo chipset).
Oh and yeah, it's a Corsair Force 3 SSD
Motherboard is a Gigabyte Z68AP-D3
Does anyone know that if I update the bios will it wipe all the overclocking settings?
Last edited by Neanderthal; 24 August 2012 at 09:38 AM.
#12
Moderator
iTrader: (1)
So that pretty much rules out RAM and CPU. I forgot to ask was there any file names at the bottom of each BSOD?
This may help, i.e if its the same file every time and if its a graphics driver, it would point to a graphics card/driver issue. Likewise with ethernet drivers, sound drivers etc.
If its different file on every BSOD, then that may well be an SSD issue.
Could look at memory dumps, but I'm rubbish at that kind of thing.
This may help, i.e if its the same file every time and if its a graphics driver, it would point to a graphics card/driver issue. Likewise with ethernet drivers, sound drivers etc.
If its different file on every BSOD, then that may well be an SSD issue.
Could look at memory dumps, but I'm rubbish at that kind of thing.
#13
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Jun 2001
Location: Northampton, Xbox GamerTag - Neanderthal1976
Posts: 6,850
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for all your help Ali.
I haven't updated the bios yet, the utility on the CD that came with the motherboard said it didn't need doing?
Anyways, it's been running all day without a hitch so far
Next time it BSOD I'll have a look to see if it lists a file.
I haven't updated the bios yet, the utility on the CD that came with the motherboard said it didn't need doing?
Anyways, it's been running all day without a hitch so far
Next time it BSOD I'll have a look to see if it lists a file.
#18
Scooby Regular
iTrader: (1)
Join Date: Apr 2005
Location: In the Flatlands of Lincolnshire
Posts: 2,892
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like reversing the fan so it is pulling cold air in as helped nicely. What CPU cooler are you running? When I upgraded to a I7 cpu even though not overclocked I went for a corsair H80 water cooling kit to ensure it is well cooled.
#19
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
It will be your bios, there are 2 revisions of your mobo, r1 and r2, go onto their website and download the latest bios and upgrade, see what you have in there now but ill put my money on it being a UEFI issue
http://uk.gigabyte.com/products/prod...d=3897&dl=1#ov
http://uk.gigabyte.com/products/prod...4015&dl=1#bios
Tony
http://uk.gigabyte.com/products/prod...d=3897&dl=1#ov
http://uk.gigabyte.com/products/prod...4015&dl=1#bios
Tony
#20
Administrator
iTrader: (2)
Join Date: May 2003
Location: Blackpool, Uk. Destination: Rev Limiter.
Posts: 4,464
Likes: 0
Received 0 Likes
on
0 Posts
Run "Whocrashed" (google it) for more details of what is failing.
Check Bios and SSD Firmware for any updates.
Also check windows is actually configured properly to access an SSD (sometimes it screws up) and finally, download and run this monitor as it is excellent and has saved me many a potential screw up with our servers by warning me well in advance of imminent hard disk failures. http://dojonorthsoftware.net/TBM/WindowSMART.aspx
Check Bios and SSD Firmware for any updates.
Also check windows is actually configured properly to access an SSD (sometimes it screws up) and finally, download and run this monitor as it is excellent and has saved me many a potential screw up with our servers by warning me well in advance of imminent hard disk failures. http://dojonorthsoftware.net/TBM/WindowSMART.aspx
#21
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Jun 2001
Location: Northampton, Xbox GamerTag - Neanderthal1976
Posts: 6,850
Likes: 0
Received 0 Likes
on
0 Posts
Thanks chaps
It's been completely stable since reversing the fan and I also updated all the inf files (doubt that made a difference though!).
I can't remember what the upgraded cpu fan is, came installed as part of the overclocked bundle. Will deffo run more tests though as I was monitoring temps for months and they were never dangerously high.
My motherboard is the R1 version.
It's been completely stable since reversing the fan and I also updated all the inf files (doubt that made a difference though!).
I can't remember what the upgraded cpu fan is, came installed as part of the overclocked bundle. Will deffo run more tests though as I was monitoring temps for months and they were never dangerously high.
My motherboard is the R1 version.
Last edited by Neanderthal; 01 September 2012 at 12:19 AM.
#22
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Jun 2001
Location: Northampton, Xbox GamerTag - Neanderthal1976
Posts: 6,850
Likes: 0
Received 0 Likes
on
0 Posts
You couldn't write it, no sooner had I typed that, the next time I checked it and it had BSOD!
Will do more checking and deffo update the bios now.
Will do more checking and deffo update the bios now.
Last edited by Neanderthal; 01 September 2012 at 08:09 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Phil3822
General Technical
0
30 September 2015 06:29 PM
JackClark
Computer & Technology Related
1
25 September 2015 06:50 PM