Wireless facility not working
#1
Scooby Regular
Thread Starter
iTrader: (46)
Join Date: Nov 2005
Location: Probably polishing it.Lol
Posts: 5,381
Likes: 0
Received 0 Likes
on
0 Posts
Wireless facility not working
I have a Netgear Wireless router that worked around 12 months ago but for unknown reasons now I can't get wireless broadband with it.
My laptop is wireless enabled and yes I have tried switching the wireless facility on and off loads of times but no joy.
I can get a [poor]wireless reception using someone elses wireless signal local to me so my laptop appears to work wirelessly.
I have also input the pass key etc needed to combine the laptop/router.
Currently I have the Yellow Ethernet cable from laptop to router to use broadband.
What could be the problem?
My laptop is wireless enabled and yes I have tried switching the wireless facility on and off loads of times but no joy.
I can get a [poor]wireless reception using someone elses wireless signal local to me so my laptop appears to work wirelessly.
I have also input the pass key etc needed to combine the laptop/router.
Currently I have the Yellow Ethernet cable from laptop to router to use broadband.
What could be the problem?
#5
If its a netgear dg 3xxxx34xx V3 whatever, be aware it has 3 levels of
reboot.
The simple press the tit with a pin just performs a quick reset, you do not
loose any data.
The longer hold until the lights flash does sod all, it will flash the lights until
the cows come home, but will not reset.
You need to do the long press, wait until the lights flash and then pull the
power.
On restart, it should have cleared everything.
btw you dont have enough fingers to do all the combinations of press pull
and hold at once
Mart
reboot.
The simple press the tit with a pin just performs a quick reset, you do not
loose any data.
The longer hold until the lights flash does sod all, it will flash the lights until
the cows come home, but will not reset.
You need to do the long press, wait until the lights flash and then pull the
power.
On restart, it should have cleared everything.
btw you dont have enough fingers to do all the combinations of press pull
and hold at once
Mart
Trending Topics
#8
Scooby Regular
Join Date: Oct 2004
Location: Kamloops British Columbia Canada
Posts: 1,863
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM
spudboytim
Other Marques
10
26 September 2015 01:19 PM
andy97
Computer & Technology Related
12
16 September 2015 08:07 PM