drivers
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Oct 2003
Location: on the B Roads..
Posts: 1,957
Likes: 0
Received 0 Likes
on
0 Posts
drivers
desperately need some drivers for a LTC-48161H DVD-CDr combo drive, anyone know where I can get them from ?? all i can find is firmware updates..
also need some for a philips drive..
thanks, alex..
also need some for a philips drive..
thanks, alex..
#3
Scooby Regular
Join Date: Oct 2004
Location: Never do names esp. Joey, spaz or Mong
Posts: 39,688
Likes: 0
Received 0 Likes
on
0 Posts
The only drivers you'll ever need for that would be a dos aspi driver
Why do you need a windows driver If the bios detects it, it will be installed automatically by windows on boot up.
Why do you need a windows driver If the bios detects it, it will be installed automatically by windows on boot up.
#5
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Oct 2003
Location: on the B Roads..
Posts: 1,957
Likes: 0
Received 0 Likes
on
0 Posts
getting this message on both drives..
Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)
Click Troubleshoot to start the troubleshooter for this device.
Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)
Click Troubleshoot to start the troubleshooter for this device.
#6
Scooby Regular
Join Date: Oct 2004
Location: Never do names esp. Joey, spaz or Mong
Posts: 39,688
Likes: 0
Received 0 Likes
on
0 Posts
Normally a code 41 is this:
Recommended resolution
A driver was loaded but Windows cannot find the device. This error occurs when Windows does not detect a non-Plug and Play device.
If the device was removed, uninstall the driver, install the device, and then click Scan for hardware changes to reinstall the driver. If the hardware was not removed, obtain a new or updated driver for the device.
If the device is a non-Plug and Play device, a newer version of the driver might be needed. To install non-Plug and Play devices, use the Add Hardware wizard. Click Performance and Maintenance on Control Panel, click System, and on the Hardware tab, click Add Hardware Wizard.
On the General Properties tab of the device, click Troubleshoot to start the Troubleshooting Wizard.
Recommended resolution
A driver was loaded but Windows cannot find the device. This error occurs when Windows does not detect a non-Plug and Play device.
If the device was removed, uninstall the driver, install the device, and then click Scan for hardware changes to reinstall the driver. If the hardware was not removed, obtain a new or updated driver for the device.
If the device is a non-Plug and Play device, a newer version of the driver might be needed. To install non-Plug and Play devices, use the Add Hardware wizard. Click Performance and Maintenance on Control Panel, click System, and on the Hardware tab, click Add Hardware Wizard.
On the General Properties tab of the device, click Troubleshoot to start the Troubleshooting Wizard.
Trending Topics
#8
Scooby Regular
Join Date: Oct 2004
Location: Never do names esp. Joey, spaz or Mong
Posts: 39,688
Likes: 0
Received 0 Likes
on
0 Posts
it is plug and play - here it is on the lite on site
http://www.liteonit.com/ODD/English/..._ltc48161h.asp
http://www.liteonit.com/ODD/English/..._ltc48161h.asp
#12
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Oct 2003
Location: on the B Roads..
Posts: 1,957
Likes: 0
Received 0 Likes
on
0 Posts
removed the extra drive and returned to standard,
removed the old drivers, and reinstalled them..
still getting the smae error code, and it is loading up 4 drivers, 3 of which are H + H scsi dvdrom device
the other being the ltc 48161H
no idea what to with it now..
removed the old drivers, and reinstalled them..
still getting the smae error code, and it is loading up 4 drivers, 3 of which are H + H scsi dvdrom device
the other being the ltc 48161H
no idea what to with it now..
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM