Changing the BIOS - how?
#1
Scooby Regular
Thread Starter
Changing the BIOS - how?
Anyone know how I can tell my BIOS to look for memory in Bank 0 AND 1?
Its just seeing half the memory module (Bank 0) - how do I tell it there is memory in both Banks 0 and 1? I have a 256Mb Module with 128Mb on each side (PC is only seeing 128Mb)
Pete
Its just seeing half the memory module (Bank 0) - how do I tell it there is memory in both Banks 0 and 1? I have a 256Mb Module with 128Mb on each side (PC is only seeing 128Mb)
Pete
#2
Originally Posted by pslewis
Anyone know how I can tell my BIOS to look for memory in Bank 0 AND 1?
Its just seeing half the memory module (Bank 0) - how do I tell it there is memory in both Banks 0 and 1? I have a 256Mb Module with 128Mb on each side (PC is only seeing 128Mb)
Pete
Its just seeing half the memory module (Bank 0) - how do I tell it there is memory in both Banks 0 and 1? I have a 256Mb Module with 128Mb on each side (PC is only seeing 128Mb)
Pete
#3
Also, how many banks do you have on te mobo? The BIOS will always check for RAM automatically. Try every stick in each slot and see what gets picked up on boot.
Last edited by Pars; 27 August 2004 at 07:29 PM.
#4
Scooby Regular
Thread Starter
Thanks for the reply - I have only two slots to put RAM, I have tried both - and, yes, its RAMmed home! Pardon the pun!! Har Har!
When I look at the BIOS it sees memory in Bank 0 - I thought (wrongly it would appear) that that was fixed?
Its obviously looking and only seeing Bank 0 - which puts me back where I was ....... is it the RAM or the Motherboard!?
Sorry to those who saw me mention this fault a month ago, but holidays have been between and I thought the BIOS could be FORCED to read Bank 0 and 1 (clearly not)
Pete
When I look at the BIOS it sees memory in Bank 0 - I thought (wrongly it would appear) that that was fixed?
Its obviously looking and only seeing Bank 0 - which puts me back where I was ....... is it the RAM or the Motherboard!?
Sorry to those who saw me mention this fault a month ago, but holidays have been between and I thought the BIOS could be FORCED to read Bank 0 and 1 (clearly not)
Pete
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM