2.5Ltr MY03 C Spec Impreza seen today!
Just back from Powerstation where I saw a certain Mr Litchfield with his lovely C spec. But wait!.... After it had just been fitted with an imported american 2.5ltr engine 
That'll shift!
Hmmm Wouldn't mind one myself!
Peter

That'll shift!
Hmmm Wouldn't mind one myself!

Peter
I reckon there gunna get even more from the new engine....
But what do I know? Maybe less lag, or more torque at low revs. Dunno really, all I know is it's going to be reviewed in the press soon (according to the staff at Powerstation).
Keep em peeled!
Peter
But what do I know? Maybe less lag, or more torque at low revs. Dunno really, all I know is it's going to be reviewed in the press soon (according to the staff at Powerstation).
Keep em peeled!
Peter
How's a Spec C with a 2.5ltr block going to push out less power than a Spec C with a 2.0ltr block then?
Me thinks it will be rather rapid now (just when I was catching Iain up with my exhaust just fitted), curses!
Me thinks it will be rather rapid now (just when I was catching Iain up with my exhaust just fitted), curses!
Trending Topics
Ian
I have had no end of problems with the Milltek exhaust fitted to my JDM Sti. I believe that you have the Milltek fitted to yours.
Why can't Milltek get their act together.
The lads at Powerstation have had the car 3 times now and the heat shields keep coming loose.
Are you getting Milltek on your new car ?
I have had no end of problems with the Milltek exhaust fitted to my JDM Sti. I believe that you have the Milltek fitted to yours.
Why can't Milltek get their act together.
The lads at Powerstation have had the car 3 times now and the heat shields keep coming loose.
Are you getting Milltek on your new car ?
Nick,
I have had the Milltek on mine for 7,500 gentle miles
and have had no problems. I don't know of any others (they have sold quite a few) that have had problems. If you still have a problem with your heatshield give Rich/Milltek a call and I'm sure they do their best to sort it out 
Iain
[Edited by iainlit - 10/16/2003 11:40:26 PM]
I have had the Milltek on mine for 7,500 gentle miles
and have had no problems. I don't know of any others (they have sold quite a few) that have had problems. If you still have a problem with your heatshield give Rich/Milltek a call and I'm sure they do their best to sort it out 
Iain
[Edited by iainlit - 10/16/2003 11:40:26 PM]
Thanks Ian.
Rich told me that this had happened on quite a few of the exhausts where Milltek have reduced the weld around the manifold downpipe. They tried spot welding twice and last time took the downpipe off to seam weld the shield. I've now got another rattle from the xhaust which is driving me crazy.
It's just as well that the car goes like proverbial off a shovel to compensate.
Where are Milltek based anyway ?
Rich told me that this had happened on quite a few of the exhausts where Milltek have reduced the weld around the manifold downpipe. They tried spot welding twice and last time took the downpipe off to seam weld the shield. I've now got another rattle from the xhaust which is driving me crazy.
It's just as well that the car goes like proverbial off a shovel to compensate.
Where are Milltek based anyway ?
Glad you like the performance
Milltek are in Derbyshire.
We have had a number of STI9 JDM cars with a noise that sounds like its coming from the exhaust but it is actually some small bracket or something under the dash. Give me a call tomorrow if you like and I talk you though what we found on our cars.
Regards
Iain
Milltek are in Derbyshire. We have had a number of STI9 JDM cars with a noise that sounds like its coming from the exhaust but it is actually some small bracket or something under the dash. Give me a call tomorrow if you like and I talk you though what we found on our cars.
Regards
Iain
Joined: Sep 1999
Posts: 11,479
Likes: 27
From: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
Ian,
Sorry i can't make it his week to try the 2.5ltr
but let Ian W have my go
too busy at the Mo decorating 
I will try and make it in 2 weeks time
and you will be able loosened it up a bit by then
Tony
Sorry i can't make it his week to try the 2.5ltr
but let Ian W have my go
too busy at the Mo decorating 
I will try and make it in 2 weeks time
and you will be able loosened it up a bit by then
Tony
basic 320bhp? i thought it was 3200bhp? these figures change by the day...
there is only one japanese spec c made by subaru and that is with a 2.0 litre engine. unless iain has fitted the 2.5 litre engine and called it "the litchfield spec c", then the spec c has basic 280ps (272hbp) and is probably good for 0-60 in 4.3 secs (since I've done 4.6 in my jap spec sti running on V power out here in hong kong).
for the car to punch out 320bhp, I'm sure iain has to do a few little tweaks and remap the fuel system to run on UK fuel.
[Edited by AK47 - 10/17/2003 2:38:58 AM]
there is only one japanese spec c made by subaru and that is with a 2.0 litre engine. unless iain has fitted the 2.5 litre engine and called it "the litchfield spec c", then the spec c has basic 280ps (272hbp) and is probably good for 0-60 in 4.3 secs (since I've done 4.6 in my jap spec sti running on V power out here in hong kong).
for the car to punch out 320bhp, I'm sure iain has to do a few little tweaks and remap the fuel system to run on UK fuel.
[Edited by AK47 - 10/17/2003 2:38:58 AM]
Joined: Sep 1999
Posts: 11,479
Likes: 27
From: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
AK47,
The 'Litchfield Imports' 2.0ltr Type 'C' with after market MilTek exhuast sports Cat and remaped(EcuTek) for UK fuel is 330+Bhp
HERE
Now has a aftermarket 2.5Ltr USDM block fitment, Optional extra
Tony
[Edited by T5NYW - 10/17/2003 10:31:41 PM]
The 'Litchfield Imports' 2.0ltr Type 'C' with after market MilTek exhuast sports Cat and remaped(EcuTek) for UK fuel is 330+Bhp
HERENow has a aftermarket 2.5Ltr USDM block fitment, Optional extra

Tony
[Edited by T5NYW - 10/17/2003 10:31:41 PM]
Glad some people believe me now! 
C'mon Prodrive / Subaru! Give your loyal U.K. customers a 2.5ltr turbo Impreza!
I'd snap one up! What does everybody else think? I reckon it'd go down a storm!
Peter
(edited cos it's just too ealry for spelling)
[Edited by 99PPPDriver - 10/17/2003 8:39:27 AM]

C'mon Prodrive / Subaru! Give your loyal U.K. customers a 2.5ltr turbo Impreza!
I'd snap one up! What does everybody else think? I reckon it'd go down a storm!
Peter

(edited cos it's just too ealry for spelling)
[Edited by 99PPPDriver - 10/17/2003 8:39:27 AM]
Scooby Regular
iTrader: (3)
Joined: Aug 2000
Posts: 25,565
Likes: 2
From: 1600cc's of twin scroll fun :)
PPP99,
i think we are going to get the 3ltr Impreza when its out in a few years time, the 2.5ltr was for the american market, and they prefer cc's as it looks good (but they may not get the 3ltr so thats better for us
)
Tony
i think we are going to get the 3ltr Impreza when its out in a few years time, the 2.5ltr was for the american market, and they prefer cc's as it looks good (but they may not get the 3ltr so thats better for us
)Tony
Thread
Thread Starter
Forum
Replies
Last Post
cjquicksilver
Wanted
0
Sep 25, 2015 11:17 AM







