08/09 Hatches, Stand up and show yourselves!!!
Scooby Regular
iTrader: (3)
Join Date: Mar 2003
Location: Member of the ej20 HATCH Mafia
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
will we see you on Sunday at the MSOC meet at the ClockWare House at Sawley? from noon-onwards? (www.M-SOC.com memebership is only £15 and gets you 20% off food + drink atthe Clock Ware House too )
I have some RED T20 rear bulbs with me if you need one £6
I have some RED T20 rear bulbs with me if you need one £6
Got my bulb, I'm a bit of an eBay *****!
Not picked it up today, map sorted now, but still waiting for that clear fog light and a towing eye cover, so Monday now :-(
That yellow Hatch looks awesome, when I started the hunt for my next one, I would have loved the funds to buy the yellow Hawkeye Spec C RA-R that was at Keighley (I'd have took that risk!)
Scooby Senior
Scooby Senior
do you think would look good instead of my white on on my car.. so it looks like it follows on from the red overlays?
http://www.ebay.co.uk/itm/SUBARU-IMP...25.m3641.l6368
http://www.ebay.co.uk/itm/SUBARU-IMP...25.m3641.l6368
Scooby Regular
iTrader: (7)
do you think would look good instead of my white on on my car.. so it looks like it follows on from the red overlays?
http://www.ebay.co.uk/itm/SUBARU-IMP...25.m3641.l6368
http://www.ebay.co.uk/itm/SUBARU-IMP...25.m3641.l6368
Scooby Senior
lol me too
Scooby Senior
please tell me you've not cut it out on your kitchen work top???!!!
Scooby Regular
iTrader: (7)
Scooby Regular
iTrader: (5)
Yesterday I put some 3mm black silent coat in the boot floor area.
Test drive today and it's a really noticeable difference, much less NVH from back of the car and a feeling of solidity some how.
You are adding a little bit of weight into the car but this is a great product IMHO.
Got a few sheets left, so thinking where to put them for most effect, probably the firewall area of the floor.
Test drive today and it's a really noticeable difference, much less NVH from back of the car and a feeling of solidity some how.
You are adding a little bit of weight into the car but this is a great product IMHO.
Got a few sheets left, so thinking where to put them for most effect, probably the firewall area of the floor.
Scooby Regular
iTrader: (5)
Thanks, all. Getting the tiniest bit excited now; just got to sell my sl wagon.
I thought it was the kitchen top as well !! There was someone on here somewhere last week doing something oily on his living room rug, and I just thought if that was me the missus would have kicked me down the road !
I thought it was the kitchen top as well !! There was someone on here somewhere last week doing something oily on his living room rug, and I just thought if that was me the missus would have kicked me down the road !
Yesterday I put some 3mm black silent coat in the boot floor area.
Test drive today and it's a really noticeable difference, much less NVH from back of the car and a feeling of solidity some how.
You are adding a little bit of weight into the car but this is a great product IMHO.
Got a few sheets left, so thinking where to put them for most effect, probably the firewall area of the floor.
Test drive today and it's a really noticeable difference, much less NVH from back of the car and a feeling of solidity some how.
You are adding a little bit of weight into the car but this is a great product IMHO.
Got a few sheets left, so thinking where to put them for most effect, probably the firewall area of the floor.
Scooby Regular
iTrader: (7)
Scooby Regular
iTrader: (3)
I was going to ask you about that Sharkfin Don. I've found the Perrin aerial isn't anywhere near as good as stock for reception.
My glove box "drops" when I open it.
There is a cylinder on the left side ( by door pillar ) which will be the glove box damper.
This cylinder does not seem to connect to anything at the top!
Unclipped it from the glove box door at the bottom and it came out; it seems to end at the top in an open tube, with white / cream rubber inner part inside the black plastic tube.
Is this damper broken?
Can it be clipped back together? ( expect I will have to remove the dash end panel by door to gain access? )
If not can I get a spare from the dealer?
Thanks!
There is a cylinder on the left side ( by door pillar ) which will be the glove box damper.
This cylinder does not seem to connect to anything at the top!
Unclipped it from the glove box door at the bottom and it came out; it seems to end at the top in an open tube, with white / cream rubber inner part inside the black plastic tube.
Is this damper broken?
Can it be clipped back together? ( expect I will have to remove the dash end panel by door to gain access? )
If not can I get a spare from the dealer?
Thanks!
Scooby Regular
My glove box "drops" when I open it.
There is a cylinder on the left side ( by door pillar ) which will be the glove box damper.
This cylinder does not seem to connect to anything at the top!
Unclipped it from the glove box door at the bottom and it came out; it seems to end at the top in an open tube, with white / cream rubber inner part inside the black plastic tube.
Is this damper broken?
Can it be clipped back together? ( expect I will have to remove the dash end panel by door to gain access? )
If not can I get a spare from the dealer?
Thanks!
There is a cylinder on the left side ( by door pillar ) which will be the glove box damper.
This cylinder does not seem to connect to anything at the top!
Unclipped it from the glove box door at the bottom and it came out; it seems to end at the top in an open tube, with white / cream rubber inner part inside the black plastic tube.
Is this damper broken?
Can it be clipped back together? ( expect I will have to remove the dash end panel by door to gain access? )
If not can I get a spare from the dealer?
Thanks!
Part numbers etc..................... item 13
http://opposedforces.com/parts/impre...llustration_3/
Last edited by Don Clark; 04 April 2016 at 09:12 PM.
Scooby Regular
Which aos
As above I had my car built by Alan jefries and it got finished in January
I think the pics tell the story on the weekend I uprated the standard cooler because Martyn said it was the major restrictive factor. To this
Should easily be part of the 400hp club now But one thing it did notice was the amount of oil in the intake / cooler so looking at aos now what ones you guys using or would you recommend thanks
Alex
I think the pics tell the story on the weekend I uprated the standard cooler because Martyn said it was the major restrictive factor. To this
Should easily be part of the 400hp club now But one thing it did notice was the amount of oil in the intake / cooler so looking at aos now what ones you guys using or would you recommend thanks
Alex
Last edited by kershaw-330s; 05 April 2016 at 02:08 PM.
Scooby Senior
Impressive.. dare we ask what a build costs?
I thought you sold your 330s?
I thought you sold your 330s?
Scooby Regular
Lol a lot I think you already asked me on the Subaru owners club .. They start at 5.5 K onwards but the quality of Alan j work is second to nun and no! I would never sell. So anyway back to my original question what aos are you guys using any recommendations?
Scooby Regular
iTrader: (6)
As above I had my car built by Alan jefries and it got finished in January
Should easily be part of the 400hp club now But one thing it did notice was the amount of oil in the intake / cooler so looking at aos now what ones you guys using or would you recommend thanks
Alex
Should easily be part of the 400hp club now But one thing it did notice was the amount of oil in the intake / cooler so looking at aos now what ones you guys using or would you recommend thanks
Alex
fair bit of info here on AOS. im running the S2 one on my hatch now, i dont vent back into intake but instead into a plastic bottle down beside the battery & Water squirter bottle
http://www.scoobynet.com/general-tec...separator.html
http://i5.photobucket.com/albums/y18...pslgjb8iws.jpg
http://i5.photobucket.com/albums/y18...psp1zio6jn.jpg
Last edited by Gambit; 05 April 2016 at 02:12 PM.
Scooby Regular
your build looks great
fair bit of info here on AOS. im running the S2 one on my hatch now, i dont vent back into intake but instead into a plastic bottle down beside the battery & Water squirter bottle
http://www.scoobynet.com/general-tec...separator.html
http://i5.photobucket.com/albums/y18...pslgjb8iws.jpg
http://i5.photobucket.com/albums/y18...psp1zio6jn.jpg
fair bit of info here on AOS. im running the S2 one on my hatch now, i dont vent back into intake but instead into a plastic bottle down beside the battery & Water squirter bottle
http://www.scoobynet.com/general-tec...separator.html
http://i5.photobucket.com/albums/y18...pslgjb8iws.jpg
http://i5.photobucket.com/albums/y18...psp1zio6jn.jpg
Last edited by kershaw-330s; 05 April 2016 at 03:26 PM.