08/09 Hatches, Stand up and show yourselves!!!
Found my burble near the M6 not far from Carlisle
Its only a catback but makes a huge difference to how the car pulls - my type UK doesn't feel asthmatic in the mid-range anymore - and it sounds like a real scooby now
Oh, and +1 on red tail light overlays please Iain

Its only a catback but makes a huge difference to how the car pulls - my type UK doesn't feel asthmatic in the mid-range anymore - and it sounds like a real scooby now
Oh, and +1 on red tail light overlays please Iain
Scooby Regular
Joined: May 2009
Posts: 99
Likes: 0
From: Oxfordshire, Xbox GT: Hawker Fury, Car: 330s Hatch
It's a date
Yeh thats all good for me!! 
I have just done my rear ARB and and put on the mount brace bars.
I have the positive traction kit to do but was waiting till I was closer to getting the four wheel alignment.
I am considering lowering springs - would be interested in a group buy price if applicable (only a small drop) and fitting.
I was thinking of getting the cosworth panel filter.
Revised steering feel - deffo
Would be interested in the Anti lift kit (powerflex) and fitting.
Four wheel laser alignment.
winmoz (Handling kit - to be fitted on the day)
StanS
MOTORS S GT
Mobius 1 (Cossy Panel filter, ALK, Springs?, Steering feel, Wheel alignment)
Dave P
lord h
riggedSTI
Rob84
Codie247
Midichlorian
Cheers
Ben
Yeh thats all good for me!! I have just done my rear ARB and and put on the mount brace bars.
I have the positive traction kit to do but was waiting till I was closer to getting the four wheel alignment.
I am considering lowering springs - would be interested in a group buy price if applicable (only a small drop) and fitting.
I was thinking of getting the cosworth panel filter.
Revised steering feel - deffo
Would be interested in the Anti lift kit (powerflex) and fitting.
Four wheel laser alignment.
winmoz (Handling kit - to be fitted on the day)
StanS
MOTORS S GT
Mobius 1 (Cossy Panel filter, ALK, Springs?, Steering feel, Wheel alignment)
Dave P
lord h
riggedSTI
Rob84
Codie247
Midichlorian
Cheers
Ben
I think riggedSTI gets about a bit....
blue bat's tail light overlay - IWSTI.com: Subaru WRX STI Forums
Follow the link on page 1 of the thread to BlueBat's photobucket site for more colours - he will sell you some from the US, but I guess Iain Litchfield does also?
Can't make my mind up between red with cut-outs or smoked...
blue bat's tail light overlay - IWSTI.com: Subaru WRX STI Forums
Follow the link on page 1 of the thread to BlueBat's photobucket site for more colours - he will sell you some from the US, but I guess Iain Litchfield does also?
Can't make my mind up between red with cut-outs or smoked...
Scooby Regular
Joined: May 2009
Posts: 99
Likes: 0
From: Oxfordshire, Xbox GT: Hawker Fury, Car: 330s Hatch
Got a set from Bulebat but when fitted were found to be undersized, got a local tinting guy to source the film and reapply but still not perfect. I think having a cutout in the middle makes it easier to stretch but a single whole sheet is more of a problem to avoid creases around the edges, tailgate overlays are fine, its the outer lense overlays which are the problem.
Mog
Last edited by Mog; Jul 6, 2009 at 11:05 PM.
I think riggedSTI gets about a bit....
blue bat's tail light overlay - IWSTI.com: Subaru WRX STI Forums
Follow the link on page 1 of the thread to BlueBat's photobucket site for more colours - he will sell you some from the US, but I guess Iain Litchfield does also?
Can't make my mind up between red with cut-outs or smoked...
blue bat's tail light overlay - IWSTI.com: Subaru WRX STI Forums
Follow the link on page 1 of the thread to BlueBat's photobucket site for more colours - he will sell you some from the US, but I guess Iain Litchfield does also?
Can't make my mind up between red with cut-outs or smoked...

Last edited by NormantheDog; Jul 6, 2009 at 11:05 PM. Reason: Poor night time spelling
Not sure as will depend on how many people commit to spending money on the day, but when I spoke to Iain he was thinking 10-15% discount might be do-able (that could mean that the £765 handling pack could be on my car for aroundd £650
.
Iain is also going to put some prices together for some popular bits and bobs (strut braces, light overlayes etc) so wathc this space.
Cheers
W
.Iain is also going to put some prices together for some popular bits and bobs (strut braces, light overlayes etc) so wathc this space.
Cheers
W
Players so far...........
winmoz (Handling kit - to be fitted on the day)
StanS
MOTORS S GT
Mobius 1 (Cossy Panel filter, ALK, Springs?, Steering feel, Wheel alignment)
Dave P
lord h
riggedSTI
Rob84
Codie247
Midichlorian
2 potentials for light overlays
Cheers
W
winmoz (Handling kit - to be fitted on the day)
StanS
MOTORS S GT
Mobius 1 (Cossy Panel filter, ALK, Springs?, Steering feel, Wheel alignment)
Dave P
lord h
riggedSTI
Rob84
Codie247
Midichlorian
2 potentials for light overlays
Cheers
W
Mobius - just had my AST suspension lowered and it makes it look much better. Also has made the ride less harsh (contrary to my expectations) - apparently the spring length is increased when its lowered ! (I haven't worked out how ???)
Ride height is now the same as Iain's - 650mm (ish) from road to top of metal bit of wheel arch (a few mm higher on front o/s to allow for settling when the driver is in ! - happened by accident rather than design !). Recommend the AST's
Scooby 2008 pictures by StanW - Photobucket
Stan
Ride height is now the same as Iain's - 650mm (ish) from road to top of metal bit of wheel arch (a few mm higher on front o/s to allow for settling when the driver is in ! - happened by accident rather than design !). Recommend the AST's

Scooby 2008 pictures by StanW - Photobucket
Stan
Mobius - just had my AST suspension lowered and it makes it look much better. Also has made the ride less harsh (contrary to my expectations) - apparently the spring length is increased when its lowered ! (I haven't worked out how ???)
Ride height is now the same as Iain's - 650mm (ish) from road to top of metal bit of wheel arch (a few mm higher on front o/s to allow for settling when the driver is in ! - happened by accident rather than design !). Recommend the AST's
Stan
Ride height is now the same as Iain's - 650mm (ish) from road to top of metal bit of wheel arch (a few mm higher on front o/s to allow for settling when the driver is in ! - happened by accident rather than design !). Recommend the AST's

Stan
Mog
Sorry to change the subject but keep meaning to ask about Orange Peel Paint. I was looking at the RS Focus as an alternative but one of the issues that put me off was the reports of the orange peel paint and then when I got to see one and saw how bad it was it nailed the coffin. However I have noticed with my Hatch that it too has some orange peel, it's dark grey. Has anyone else noticed this on theirs would any particular colour be worse than another? It was concluded on the RS that it was associated with the new 'water' based paints and that BMW, Mercs etc were just as bad.
Mog
Sorry to change the subject but keep meaning to ask about Orange Peel Paint. I was looking at the RS Focus as an alternative but one of the issues that put me off was the reports of the orange peel paint and then when I got to see one and saw how bad it was it nailed the coffin. However I have noticed with my Hatch that it too has some orange peel, it's dark grey. Has anyone else noticed this on theirs would any particular colour be worse than another? It was concluded on the RS that it was associated with the new 'water' based paints and that BMW, Mercs etc were just as bad.
Mog
I wouldn't say it was as bad as the Focus but it is there. I'll try and take some photos if I get chance. Mobius says he has noticed a bit but you do have to look. The most noticeable was the rear below the fixed windows.




Got a set from Bulebat but when fitted were found to be undersized, got a local tinting guy to source the film and reapply but still not perfect. I think having a cutout in the middle makes it easier to stretch but a single whole sheet is more of a problem to avoid creases around the edges, tailgate overlays are fine, its the outer lense overlays which are the problem.
Mog
(I'm swaying back to a red tint solution, so if anyone wants my dark smoke them pm me.)
I've got a set of Harmen Auto dark tints sat in my boot... went to local tint man who wanted £100 to fit em..and he mentioned they looked a tad on the small side too...but thought they'd stretch under heating.
(I'm swaying back to a red tint solution, so if anyone wants my dark smoke them pm me.)
(I'm swaying back to a red tint solution, so if anyone wants my dark smoke them pm me.)
http://www.surreyscoobies.co.uk/foru...9444_thumb.jpg


615mm measured from floor to the lip on the rear arch, allmost certain its that i will double check again my tyres are just a say level with the arch maybe slightly inside the arch if that makes sence lol



