ScoobyClinic 330mm 6pot replacement parts
12 November 2012, 08:17 PM
#1
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Jul 2012
Location: Cambridgeshire
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
ScoobyClinic 330mm 6pot replacement parts
Hi all,
I have a set of the old Scoobyclinic 330mm 6pots on the front of my car - which were fitted when I bought it. I am in need of replacement pads, and rotors too but not as urgent ;-)
Speaking to ScoobyClinic they no longer supply these brakes, and do not stock any parts, and gave me no clues on where to look. These were a few grand to buy and for SC to simply stop supporting customers with them is a very poor service IMO
Does anyone else have these? or know where to get the pads I need?
I really need help here
I have a set of the old Scoobyclinic 330mm 6pots on the front of my car - which were fitted when I bought it. I am in need of replacement pads, and rotors too but not as urgent ;-)
Speaking to ScoobyClinic they no longer supply these brakes, and do not stock any parts, and gave me no clues on where to look. These were a few grand to buy and for SC to simply stop supporting customers with them is a very poor service IMO
Does anyone else have these? or know where to get the pads I need?
I really need help here
12 November 2012, 08:20 PM
#2
Scooby Regular
Join Date: Jun 2002
Location: Stoke-on-Trent
Posts: 674
Likes: 0
Received 0 Likes
on
0 Posts
Alwyn at AS Performance is always helpful. I'm sure he'll fix you up. alternatively Ian Godney at Godspeed Brakes should be able to make something up to fit.
13 November 2012, 10:33 PM
#3
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Jul 2012
Location: Cambridgeshire
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Ian,
Dropped ASP a mail, and have spoken to Ian@GodSpeed and it is not looking good. Any other ideas? Surely I am not the only one with these brakes?
Dropped ASP a mail, and have spoken to Ian@GodSpeed and it is not looking good. Any other ideas? Surely I am not the only one with these brakes?
14 November 2012, 11:31 AM
#5
Scooby Regular
Join Date: Nov 2009
Location: Scoobyclinic & Hull!
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Hi all,
I have a set of the old Scoobyclinic 330mm 6pots on the front of my car - which were fitted when I bought it. I am in need of replacement pads, and rotors too but not as urgent ;-)
Speaking to ScoobyClinic they no longer supply these brakes, and do not stock any parts, and gave me no clues on where to look. These were a few grand to buy and for SC to simply stop supporting customers with them is a very poor service IMO
Does anyone else have these? or know where to get the pads I need?
I really need help here
I have a set of the old Scoobyclinic 330mm 6pots on the front of my car - which were fitted when I bought it. I am in need of replacement pads, and rotors too but not as urgent ;-)
Speaking to ScoobyClinic they no longer supply these brakes, and do not stock any parts, and gave me no clues on where to look. These were a few grand to buy and for SC to simply stop supporting customers with them is a very poor service IMO
Does anyone else have these? or know where to get the pads I need?
I really need help here
We have replacement pads in stock, £164+VAT. I’m surprised whoever you spoke to here didn’t pass this information on.
Phew, glad it’s not urgent because we haven’t got any of them. All enquiries of that nature we usually pass on to Godspeed, I’m surprised whoever you spoke to here didn’t pass this information on.
Can’t argue with that.
See my earlier point regarding pads.
See my earlier points regarding pads and Godspeed.
A few grand? £1200+VAT….we’re northerners for pity’s sake!
See my earlier point regarding pads. They’re here on the shelf and the price is £164+VAT. I’ll even sort you a bit of discount if, in return, you promise to give me a cuddle….it’s bloomin’ cold up here at this time of year and the Gaffer shouts at me whenever I put the heating on!
I feel your pain mate, I find alcohol numbs the feeling a little.
Keep smiling
DannyP
14 November 2012, 03:59 PM
#6
I’ll try and respond to the more salient points of your post in the order they appear….
We have replacement pads in stock, £164+VAT. I’m surprised whoever you spoke to here didn’t pass this information on.
Phew, glad it’s not urgent because we haven’t got any of them. All enquiries of that nature we usually pass on to Godspeed, I’m surprised whoever you spoke to here didn’t pass this information on.
Can’t argue with that.
See my earlier point regarding pads.
See my earlier points regarding pads and Godspeed.
A few grand? £1200+VAT….we’re northerners for pity’s sake!
Really? It was 5 and a half years ago to be fair.
See my earlier point regarding pads. They’re here on the shelf and the price is £164+VAT. I’ll even sort you a bit of discount if, in return, you promise to give me a cuddle….it’s bloomin’ cold up here at this time of year and the Gaffer shouts at me whenever I put the heating on!
I feel your pain mate, I find alcohol numbs the feeling a little.
Keep smiling
DannyP
We have replacement pads in stock, £164+VAT. I’m surprised whoever you spoke to here didn’t pass this information on.
Phew, glad it’s not urgent because we haven’t got any of them. All enquiries of that nature we usually pass on to Godspeed, I’m surprised whoever you spoke to here didn’t pass this information on.
Can’t argue with that.
See my earlier point regarding pads.
See my earlier points regarding pads and Godspeed.
A few grand? £1200+VAT….we’re northerners for pity’s sake!
Really? It was 5 and a half years ago to be fair.
See my earlier point regarding pads. They’re here on the shelf and the price is £164+VAT. I’ll even sort you a bit of discount if, in return, you promise to give me a cuddle….it’s bloomin’ cold up here at this time of year and the Gaffer shouts at me whenever I put the heating on!
I feel your pain mate, I find alcohol numbs the feeling a little.
Keep smiling
DannyP
1,what brake pad is the £164 + vat
2,who made the capliers and what make are they?
3,can rotors be brought anywhere?
4, if you can do an deal on the pads i will have a set
cheers james
15 November 2012, 12:08 AM
#7
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Jul 2012
Location: Cambridgeshire
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
So I gave a call to SC today following seeing the above, and it appears that there was a little mis-communication when I originally enquired on parts. However I have to say that after a while having a good laugh on the phone; Danny is a true Gent and has sorted my issue. I will have new pads on my door step tomorrow just in time for some track action at weekend. I was feeling really bad as these brakes are awesome and I was actually considering pulling these off and getting something else.
Danny; I expect it will scare the **** out of you when I do arrive for an unannounced visit and deliver that cuddle without warning - you asked for it remember ;-)
James: 1) EBC YellowStuff, 2) One Off design - so no cross compatibility from what I have found, 3) GodSpeed have drawings and will make to order, 4) Give SC a call.
Danny; I expect it will scare the **** out of you when I do arrive for an unannounced visit and deliver that cuddle without warning - you asked for it remember ;-)
James: 1) EBC YellowStuff, 2) One Off design - so no cross compatibility from what I have found, 3) GodSpeed have drawings and will make to order, 4) Give SC a call.
Trending Topics
15 November 2012, 01:17 AM
#8
So I gave a call to SC today following seeing the above, and it appears that there was a little mis-communication when I originally enquired on parts. However I have to say that after a while having a good laugh on the phone; Danny is a true Gent and has sorted my issue. I will have new pads on my door step tomorrow just in time for some track action at weekend. I was feeling really bad as these brakes are awesome and I was actually considering pulling these off and getting something else.
Danny; I expect it will scare the **** out of you when I do arrive for an unannounced visit and deliver that cuddle without warning - you asked for it remember ;-)
James: 1) EBC YellowStuff, 2) One Off design - so no cross compatibility from what I have found, 3) GodSpeed have drawings and will make to order, 4) Give SC a call.
Danny; I expect it will scare the **** out of you when I do arrive for an unannounced visit and deliver that cuddle without warning - you asked for it remember ;-)
James: 1) EBC YellowStuff, 2) One Off design - so no cross compatibility from what I have found, 3) GodSpeed have drawings and will make to order, 4) Give SC a call.
have to say they performed really well on the recent euro tripci went on with 3 other P1's ,2 on ap 6pots, 1 on stoptech 6pots have to say they matched them
googled them and allsorts trying to find pads etc etc,
thanks james
15 November 2012, 09:01 AM
#9
Scooby Regular
Join Date: Nov 2009
Location: Scoobyclinic & Hull!
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
So I gave a call to SC today following seeing the above, and it appears that there was a little mis-communication when I originally enquired on parts. However I have to say that after a while having a good laugh on the phone; Danny is a true Gent and has sorted my issue. I will have new pads on my door step tomorrow just in time for some track action at weekend. I was feeling really bad as these brakes are awesome and I was actually considering pulling these off and getting something else.
15 November 2012, 09:03 AM
#10
Scooby Regular
Join Date: Nov 2009
Location: Scoobyclinic & Hull!
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Preferably after I've had my morning caffeine injection!
15 November 2012, 10:43 PM
#11
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Jul 2012
Location: Cambridgeshire
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Ok, you may win the challenge ;-) Great little vid BTW - great to see the operation and I will have to call in if passing!
16 November 2012, 12:19 PM
#12
Scooby Regular
iTrader: (7)
Join Date: Oct 2003
Location: Stealth mode on
Posts: 5,277
Likes: 0
Received 0 Likes
on
0 Posts
I had these on my Old Type R,
I found the standard disc very poor, they warped with less than 3000 road miles.
I took them down to Ian at Godspeed and had him make replacements. once these were fitted with bluestuff pads the brakes were awesome.
I had to change the pads and purchased a set from Scoobyclinic for around £210 for a set of EBC yellowstuff pads, I checked the part numbers on EBC directs website after receiving the pads and found these could be had for £124
The part number for EBC is DP4047R or what I did was a have a set of blue stuff made up when they asked for tester which is DP5047R
I found the standard disc very poor, they warped with less than 3000 road miles.
I took them down to Ian at Godspeed and had him make replacements. once these were fitted with bluestuff pads the brakes were awesome.
I had to change the pads and purchased a set from Scoobyclinic for around £210 for a set of EBC yellowstuff pads, I checked the part numbers on EBC directs website after receiving the pads and found these could be had for £124
The part number for EBC is DP4047R or what I did was a have a set of blue stuff made up when they asked for tester which is DP5047R
17 November 2012, 12:01 AM
#13
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Jul 2012
Location: Cambridgeshire
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Fitted the EBC YellowStuffs today and EBC have made the pad back plate smaller than the original:
As you can see it did not sit right in the runners, note the gap at the top:
My first install resulted in the pad slipping out of the calliper:
A little modification to the callipers pad guides and they are in, just in time too as the originals were a whisker off running metal on metal. I think I will be sending my original back plates to be relined. I may get a friend to machine me an extra pair of back plates up too so I can rotate them. Not sure how much a custom relining is gonna cost.
Anyone else found this? Could it be an odd set, or that I have odd callipers?
As you can see it did not sit right in the runners, note the gap at the top:
My first install resulted in the pad slipping out of the calliper:
A little modification to the callipers pad guides and they are in, just in time too as the originals were a whisker off running metal on metal. I think I will be sending my original back plates to be relined. I may get a friend to machine me an extra pair of back plates up too so I can rotate them. Not sure how much a custom relining is gonna cost.
Anyone else found this? Could it be an odd set, or that I have odd callipers?
17 November 2012, 02:31 PM
#14
starting to worry now lol, i have what looks like blue stuff in mine will have a look next week when im freed up from work.
that looks a bloodly big gap as you say?
that looks a bloodly big gap as you say?
18 November 2012, 10:52 AM
#16
Scooby Regular
Join Date: Nov 2009
Location: Scoobyclinic & Hull!
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
What's the fitment like on the other set of pads Tony?
Can't do much until I'm back at work tomorrow but I'll definitely follow it up for you in the morning.
Can't do much until I'm back at work tomorrow but I'll definitely follow it up for you in the morning.
31 January 2013, 10:37 PM
#20
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Jul 2012
Location: Cambridgeshire
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
I found out that I have an early production run of the calipers, and they changed the design some point after - hence the pad fitment not being correct. I have modified the seats to accept the off the shelf pads which is not ideal but is safe.
I suggest you get some pads ordered early, before you need then, in case of issues!
I suggest you get some pads ordered early, before you need then, in case of issues!
27 July 2013, 11:30 AM
#22
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Jul 2012
Location: Cambridgeshire
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
I am now in need of new discs, one has cracked. Anyone any new experience on getting replacements. The only place I know supplying is GodSpeed - these are well in excess of £500 a pair, I am considering swapping the kit out for another.
27 July 2013, 11:16 PM
#25
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Jul 2012
Location: Cambridgeshire
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Sorry Ian, I meant no offence
Yes, I need new bells also, a new fitting kit may suffice but I would not be happy with them. Also the pad fitment issue above with a worry on future stocks is putting me off investing more into the kit. I would prefer to spend a little more now and have some confidence in an easy next service.
Yes, I need new bells also, a new fitting kit may suffice but I would not be happy with them. Also the pad fitment issue above with a worry on future stocks is putting me off investing more into the kit. I would prefer to spend a little more now and have some confidence in an easy next service.
15 August 2013, 10:37 PM
#26
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Jul 2012
Location: Cambridgeshire
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
I decided to complete a little upgrade to AP 6pot 362mm brakes. These got me though MOT and I am quite liking them. On the downside my 17" track wheels will no longer fit. I need to decide what to do with the 330mm setup..
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
aaron_ions
General Technical
1
17 September 2015 10:42 AM
BHPvstorque
Subaru Parts
4
14 September 2015 08:25 PM
