wheel advise
#2
Twatful
Join Date: Apr 2003
Location: Grew up and don't drive Scoobs anymore!
Posts: 9,050
Likes: 0
Received 0 Likes
on
0 Posts
Standard offset is ET53, most wheels in a 7x17 size with a ET48 will fit depending on spoke design. Use 215/40 tyres with these.
18's also fit with either a 215/35 or 225/35 profile
Check varios type's and designs at:
http://www.revolution.eu.com/erol.html#1x0&&
http://www.tsl-motorsport.co.uk/wheels.html
http://www.scoobyworld.co.uk/trolleyed/6/index.htm
18's also fit with either a 215/35 or 225/35 profile
Check varios type's and designs at:
http://www.revolution.eu.com/erol.html#1x0&&
http://www.tsl-motorsport.co.uk/wheels.html
http://www.scoobyworld.co.uk/trolleyed/6/index.htm
#3
Got 17"et45 on my 98 wagon running 215/40's with just the rubber wheel arch strips removed (not a problem on a JDM anyway) to make sure of no rubbing, but would not go any lower offset than this.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM
Bazil_SW
Engine Management and ECU Remapping
24
21 September 2015 11:55 PM