17s, Spacers & Brembos.
#1
Scooby Regular
Thread Starter
17s, Spacers & Brembos.
We all know there is a fitment hurdle when it comes to 17" wheels and Brembo brakes. I've currently got a set of P1 OZ wheels ET53 (iirc) so I've gathered that these wont fit without changing something.
Technically if I run a 5mm spacer it will take the ET down to 48 like the standard STi wheels so these should then fit. Has anyone ever actually done this, and if so did it then cause rubbing issues? I'd ideally like to keep these wheels as they are the right size for a classic and there ain't many 17" Revos up for sale either.
Technically if I run a 5mm spacer it will take the ET down to 48 like the standard STi wheels so these should then fit. Has anyone ever actually done this, and if so did it then cause rubbing issues? I'd ideally like to keep these wheels as they are the right size for a classic and there ain't many 17" Revos up for sale either.
#4
Scooby Senior
iTrader: (14)
As you correctly stated - 5mm spacer (made sure it is HUBCENTRIC) on your P1 WRC wheels will give enough clearance for Brembo's and you will still have enough meat on the Bolts to screw the nuts onto........
Get it done you ******!!!! - you know you want to!
Get it done you ******!!!! - you know you want to!
Last edited by WUZ; 23 August 2014 at 07:41 AM.
#6
Scooby Regular
Thread Starter
My only gripe with this was if I widen the front track by 5mm will I not need to do the same at the rear?
#7
Other option was18inch p-wrc the p1 gold wheels but they are the same offset so would probably require a spacer too 😕
Trending Topics
#11
Scooby Regular
Join Date: Nov 2011
Location: Exiled to Finland
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
OK.. Thread hijack.
Im looking at some ET55 wheels for my Bug WRX (53 std?).
what spacers could I run before I get into issues with the wheel nuts??
5mm
8mm
10mm
??
thank you
Im looking at some ET55 wheels for my Bug WRX (53 std?).
what spacers could I run before I get into issues with the wheel nuts??
5mm
8mm
10mm
??
thank you
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM