When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
what fmic is it?? i have an adaptor plate from harvey, but you can get them from ebay i think.
im running the oem recirc valve, all i needed to buy then was a 100mm hose with a 90 degree elbow to connect the recirc pipe to the dv.
It's a hdi intercooler dan. Would prefer to use the recirc if I'm honest but bov will do for the time being
Mathew what you got mate?
Martin
mine is hdi too, if it has the pipe welded in to the pipework all you need is an adaptor and a 100mm pipe with 90 degree bend oh and a pipe joiner to to attach the pipe to the inlet
mine is hdi too, if it has the pipe welded in to the pipework all you need is an adaptor and a 100mm pipe with 90 degree bend oh and a pipe joiner to to attach the pipe to the inlet
Hi Martin,
I've a newage VTA available if required.
As you local & obviously don't want a VTA, you can borrow it if it gets you up and running until you find a solution to the recirc issue.
Chris
10 October 2013, 11:08 PM
