b33fy

Wanted complete wiring loom for a 97-98 UK WRX. The part I require is to and from the engine bay/fusebox/engine to the ecu, must be totally intact and 3 plug ecu connections. No other loom will do so before making an offer make sure it fits the description above.

Preferably in the south east area, cash waiting for a good loom.

4950ken

iTrader: (49)

Hi there
Do you want a loom off a UK car or a JDM ?
On that model year, the UK car is a Turbo 2000 and the JDM is a WRX.
Ken

b33fy

The original car is a uk standard turbo, non sti.

b33fy

The original car is a uk standard turbo, non sti. I need a UK Loom

b33fy

I notice that you are Chesire based, as mentioned in the previous post I am looking for somewhere/someone more local to Kent, so I can see the loom before purchasing. My experiences of purchasing via the internet/post are frequently not good. wrong or u/s components sent, the inconvenience of sending back and the additional costs incurred

I would prefer to source more local to kent if I am not successfull I'll get back in contact with you.

Thanks

4950ken

iTrader: (49)

I realise you were looking to collect a loom from somewhere local, I don't have the one you're looking for so I'm not trying to sell you anything. I thought you might get more response once you had clarified exactly which model you needed, just trying to help

Ken

b33fy

Ken, apologies if I came across as ungrateful/unhelpful, that was not the intention. I thought I had clearly described what I required in my original post. Correct me if I've got it wrong I thought a standard UK Car (non sti)was refered to as a wrx or UK2000 model.

Looking at the V5 the car was registered in June 1998 and is refered to as a Impreza Turbo 2000.

Hope this is clearer.

Thanks again for your responses

Mike

BLU

iTrader: (27)

It'll be the Turbo 2000 loom you're after.
To help clarify can you see wether your Coilpack is in the middle or offset to the right on the inlet manifold. Reason being the two cars carry different looms and your date of registration says it could be either!

b33fy

Hi Blu, thanks for the info, the coilpack is in the centre of the engine.

Mike

4950ken

iTrader: (49)

No worries, hope the right one comes along

M4RKG

iTrader: (22)

I'm breaking a 97 WRX, have everything... what exactly you after?

b33fy

Hi Mark

I'm after the main wiring loom from the fusebox under the bonnet to the ecu/dash then to the engine and all the other sensors, rad fans, lambda etc. It needs to be from a UK turbo 2000 car with a centre coil pack and a three plug ecu. It needs to be intact not butchered or cut up in any way. You are quite a way north as mentioned I would prefer somewhere close by so I can have a look in person. as there are so many variations I need to be sure I'm getting the right one. let me know if it fits the bill if I don't have any luck closer to home I'll get back to you.

Cheers

Mike

b33fy

Sorted! thanks to Pete from South East Scoobies, top job top price and top man.

Thank you Pete.

All the best, Mike

4950ken

iTrader: (49)

Nice one Mike

Have fun fitting it