tay05

Hey guys had an awesome day at Powerstation today, was well pleased with the result. My car is a '93 WRX JDM with a decat and induction kit and produced 273.9 bhp and 296.9 Nm of torque, was well pleased . What did everyone else get?

Silver Scooby Sport

iTrader: (15)

238.4 with 220lbs torque not bad for a uk car

Return of the Twig

That's not bd for a de-cat, but are you running an 802 ecu by any chance? If so, get that re-map sorted because that should bump you up around the 275 mark.

Silver Scooby Sport

iTrader: (15)

I was very suprised Matt to say the least.... I'm sure it's the 802 ecu yes.

msp1

Is somebody posting up all the results for the day?

Gazz/John

Silver Scooby Sport

iTrader: (15)

I would imagine so Mike... Gazz is on the way to Pod now so I'm not sure if John will be doing it later.

NoCatSTI

Awsome day, really enjoyed it. 327.2 bhp on a v7 STI with TSL 333 and 3inch full decat exhaust... v v happy
Scoobypeterpump is colating all the stats... and took a shed load of photos as well. The guys at powerstation were very chilled throughout as well, very mellow day.

Thanks to all of you who made this happen

turboDean

iTrader: (4)

Yeap good day really enjoyed it, apart from the 5 minutes when i thought my car was going to be going home on a lorry, so glad to find it was just a hose come off.

Made 312bhp 333Nm, not to bad at all.

Already got the graph up in the members gallery:
http://bbs.scoobynet.co.uk/showthread.php?t=491418

360ste

iTrader: (1)

Nice one m8 only another 33 bhp to catch me at last power run , so a set of tubular headers should get you almost neck and neck. I will have to see what I get on the 28th. Will keep you informed Egor

Dave uk blue mica

i had 262 bhp not sure of the torque though my last time in my old my99, had problems that day hense the low figure!!! seen 317 on previous runs there.

Return of the Twig

If it is the 802 Si that is definitely what is holding you back! You could swap it for an 800 to get a bit more grunt, but to be honest that is just a time-killer until you go for a re-map. Ideal option would be to find a tek2 or similar with the license open meaning future maps would only need to have the mappers time charged to keep the cost down. That way if you change induction or turbo etc all you need pay for is the map.

How did Si, Daz, Danny and Kev get on by the way???

pippyrips

their on the ay bac kfrom the pod at the mo - i won't steal their thunder - you will just have to wait!

Return of the Twig

Spoilsport!!!!

scoobypeterpump

link to the results http://bbs.scoobynet.co.uk/showthread.php?t=502736

superstar1

Was driving back up to Lancashire in the Wagon after visiting friends in Swansea,saw plenty of Scoobs on M4/A50/M50 going in opposite direction, so thought something might be going on. If i'd have known i would have tagged along for the crack, should have spun round and followed.
Nice drive back anyways apart from the scummy mobile camera vans to watch out for.

DannyBoy007

iTrader: (7)

Sounds like us, 5 in convoy, two type R's (Blue and a white one), an RB5, blue new age and a DBM classic,

jasonius

iTrader: (1)

somethings seriously wrong here. 332Nm = 232ft/lb of torque..!?

My 05 wrx with the TD04 (remapped etc) made 380mn (266ft/lb) at PS last summer..! A vf34 should be ~>300 ft/lb (430Nm) surley..?

Neilo

i think thatll probably be due to the blown hose no?

andywrx27

hi guys this is my first go on here i have noticed that you are from wales and i am just wondering if there are any meets soon i could possibly visit

jasonius

iTrader: (1)

****..! Sorry guys, thought it was someone elses dyno.. ffs...Doh..!

wrx,sti

iTrader: (2)

welcome m8 yes there is a meet on the 12th click on the link below and add your name see you there

Mini Meet Wednesday 12th April, 7.30 at the Toby... Junc 30

KJD Mk1

iTrader: (3)

Welcome to the forum, your very welcome to any of our meets, next one is on the 12th april hope to see you there.
kev