Rolling road day for most powerful scoobs
#1
Right after going to PE yesterday and my engine expiring i am now looking at a 2.2/2.5/reliable/????? solution to getting my car sorted!
So that brings me on to the next question!
Who would be up for a rolling road day at PE say Feb/march time to get the most powerful scoobs in the country together for a shootout?
Any scoob any configuration, they have just got to be over 400bhp
Now i'm thinking of a date thats a good 3/4 months away so for one i can be ready and for some of the big boys to have enough time aswell would be nice to have Rannoch, Mark A, Wallis, Steven Darley, Harvey and even Pat to get his car ready
So who will be up for it? 400+ers need apply!
Scott
So that brings me on to the next question!
Who would be up for a rolling road day at PE say Feb/march time to get the most powerful scoobs in the country together for a shootout?
Any scoob any configuration, they have just got to be over 400bhp
Now i'm thinking of a date thats a good 3/4 months away so for one i can be ready and for some of the big boys to have enough time aswell would be nice to have Rannoch, Mark A, Wallis, Steven Darley, Harvey and even Pat to get his car ready
So who will be up for it? 400+ers need apply!
Scott
#3
Its 346bhp at the moment on 3 cylinders hence why i will be rebuilding my engine like i said in the original post so with about 450bhp i might just put myself in there
Scott
Scott
#4
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
Im up for that, dont know if im over 400 though
Can we have a choice of rolling road??
I dont know what PE etc's roads are like but grip might be a problem.
David
Can we have a choice of rolling road??
I dont know what PE etc's roads are like but grip might be a problem.
David
#7
Scooby Regular
Join Date: May 2002
Location: 2005 sso, 1/4 finals,3rd in 60ft; 2004 sso,semi finals,2nd in 60ft time; 2003 standard car 2nd 60ft
Posts: 4,909
Likes: 0
Received 0 Likes
on
0 Posts
will be up for this if its finished by then
does 400lbs+ torque count
[Edited by scooby-si - 11/16/2003 8:00:43 PM]
does 400lbs+ torque count
[Edited by scooby-si - 11/16/2003 8:00:43 PM]
Trending Topics
#10
Scooby Regular
Join Date: May 2002
Location: 2005 sso, 1/4 finals,3rd in 60ft; 2004 sso,semi finals,2nd in 60ft time; 2003 standard car 2nd 60ft
Posts: 4,909
Likes: 0
Received 0 Likes
on
0 Posts
i would put mikee singh down as well m8 if it ever gets finished,it will give him something to work for lol
#15
Scooby Regular
Join Date: Nov 2000
Location: 32 cylinders and many cats
Posts: 18,658
Likes: 0
Received 1 Like
on
1 Post
Spectators wear bullet proof vests in case bits of piston shrapnel come out of the exhausts
LOL, when we were mapping my car at PE in Spring 02 and we were running it at 19 PSI on a TD04 hybrid Steve moved his feet out of the footwell as he thought a conrod was going to come through and bite his ankles
LOL, when we were mapping my car at PE in Spring 02 and we were running it at 19 PSI on a TD04 hybrid Steve moved his feet out of the footwell as he thought a conrod was going to come through and bite his ankles
#16
Scooby Regular
Join Date: May 1999
Location: SSO2003 2nd, SSO2005 1st, SSO2006 2nd, TACC Rd4 5th 4wd: In my car ;-)
Posts: 2,637
Likes: 0
Received 0 Likes
on
0 Posts
Why not use Prosport's rollers
they are in Stockport, south of Manchester
Mark.
#17
I forgot Mark, everyone lives down south these days dont they. Except of course Harvey, Stephen Darley, David Wallis, Trout, John Banks, Rich Wild....... You were saying?
[Edited by johnfelstead - 11/17/2003 12:09:42 AM]
[Edited by johnfelstead - 11/17/2003 12:09:42 AM]
#18
Scooby Regular
Join Date: May 1999
Location: SSO2003 2nd, SSO2005 1st, SSO2006 2nd, TACC Rd4 5th 4wd: In my car ;-)
Posts: 2,637
Likes: 0
Received 0 Likes
on
0 Posts
John,
Did I mention anything to do with North, or South ?
My comment was directed at "Stockport, south of Manchester"
But since you Bring up North/South, apart from JB, Trout, Steven Darley, David Wallis, Harvey, Rich Wild, Etc, have hardley had far to travel for the last 6 Well Lane shoot outs !!!
Or, is it because you only live 10min's away from Prosport, and also happen to help them out, running their RR for them
TBH, I don't think it matters where it's run, so long as the dyno is used to running big power Subaru's. Guess that means we'll all need to get our engines down to DTW then
Mark. tongue firmly in cheek........
Did I mention anything to do with North, or South ?
My comment was directed at "Stockport, south of Manchester"
But since you Bring up North/South, apart from JB, Trout, Steven Darley, David Wallis, Harvey, Rich Wild, Etc, have hardley had far to travel for the last 6 Well Lane shoot outs !!!
Or, is it because you only live 10min's away from Prosport, and also happen to help them out, running their RR for them
TBH, I don't think it matters where it's run, so long as the dyno is used to running big power Subaru's. Guess that means we'll all need to get our engines down to DTW then
Mark. tongue firmly in cheek........
#19
Or, is it because you only live 10min's away from Prosport, and also happen to help them out, running their RR for them
I have "helped them out" as you put it, by manning the phone for a few days, to assist them when they were very busy in return for the favour of them allowing me to use their facilities for free, to rebuild my engine after it failed at TOTB2. This helped speed up me getting my car back on the road and at the same time gave me an insight into what is involved in running a top quality Subaru specialists on a daily basis.
If you are implying i work for them, then you are wrong, i spend too much time abroad on WRC events to be employable right now. I am a long term customer of theirs and apreciate the quality of service they offer and the amount of help they gave me when my car was in a seriously sick state post TOTB2.
As to living close to them, i dont see what relevence that has as i wont be running my car because it only has 300BHP. You should know by now i dont follow the RR days, it's not my thing, but there are good facilities available that others may apreciate that are worth a mention in this thread.
Now can we get back to what this thread is all about please. If you want to use a very good quality RR that gives what seems to be very acurate readings and doesnt load the cars up excesively then Prosport is a very good option.
[Edited by johnfelstead - 11/17/2003 1:22:52 AM]
#20
Scooby Regular
Join Date: Mar 2002
Location: Fcon Power Writer
Posts: 4,338
Likes: 0
Received 0 Likes
on
0 Posts
I am not 100% sure my car will be ready in time as my plan of action spans to April... But put my name down as a poss.
If it can be April i'll be there
Rob
If it can be April i'll be there
Rob
#24
Drag it!
iTrader: (1)
Join Date: Jun 2002
Location: Flame grilled Wagon anyone?
Posts: 9,866
Likes: 0
Received 0 Likes
on
0 Posts
Dont think i will be over 400 Scott. Current engine running fine (touch wood) so sold the 2.5 block to someone else.
I will come and benchmark if you like, mid 340ish scoob at Well Lane, see what it does at PE. I could run 1st and then you can all laugh as you beat it.
Sorry to hear about the engine, what happened (barring the obvious)
Mail me if you like
Steven
I will come and benchmark if you like, mid 340ish scoob at Well Lane, see what it does at PE. I could run 1st and then you can all laugh as you beat it.
Sorry to hear about the engine, what happened (barring the obvious)
Mail me if you like
Steven
#25
Scooby Regular
Join Date: Feb 2005
Location: South Bucks
Posts: 17,732
Likes: 0
Received 0 Likes
on
0 Posts
Agree with the comments on G-Force - I am going along to check it out very soon (for my RR Day in Jan) - but the spec is amazing and makes most rolling roads look prehistoric .....
Aylesbury is a nice easy location for everyone to get too as it's only 15 mins off the M40 and 30 mins from the M1 at Milton Keynes!
Aylesbury is a nice easy location for everyone to get too as it's only 15 mins off the M40 and 30 mins from the M1 at Milton Keynes!
#27
Scooby Regular
Join Date: May 1999
Location: SSO2003 2nd, SSO2005 1st, SSO2006 2nd, TACC Rd4 5th 4wd: In my car ;-)
Posts: 2,637
Likes: 0
Received 0 Likes
on
0 Posts
John,
I clearly said "help them out". I did not say, or imply that you worked for them.
YOU told me that you ran a RR day for them, and that's what my comments were based on ! Maybe I misunderstood just what your involvement was.........
Mark.
I clearly said "help them out". I did not say, or imply that you worked for them.
YOU told me that you ran a RR day for them, and that's what my comments were based on ! Maybe I misunderstood just what your involvement was.........
Mark.
#28
Mark, you know exactly what you were implying, you arent that stupid. I am amazed you are writing details of our telephone conversations on an internet BBS, especially ones where you have obviously got the wrong end of the stick from.
#29
Scooby Regular
Join Date: May 1999
Location: SSO2003 2nd, SSO2005 1st, SSO2006 2nd, TACC Rd4 5th 4wd: In my car ;-)
Posts: 2,637
Likes: 0
Received 0 Likes
on
0 Posts
John,
You are turning what started off as a "Joke" comment from me about "Stockport", into something very different !
This was not a conversation told in confidence, nore did you ever state, or imply that it should be kept that way. I thought that one of the reasons you had told me, was because if people knew you were invloved, they would be more inclinded to try a relatively unknown RR.
For the sake of the thread, I'll concede that I misunderstood what you told me. The fact that I believed you were involved in running their dyno, is a good, not a bad thing.
Mark.
You are turning what started off as a "Joke" comment from me about "Stockport", into something very different !
I am amazed you are writing details of our telephone conversations on an internet BBS
For the sake of the thread, I'll concede that I misunderstood what you told me. The fact that I believed you were involved in running their dyno, is a good, not a bad thing.
Mark.