Geometry on 04STI
25 January 2007, 07:40 PM
#1
Scooby Regular
Thread Starter
Geometry on 04STI
Hey,
I just wanted to hear about the perfect setup for a Fast road & Trackday worrier.
(I have a set of AST sportline ii with cusco top plates, front swaybar 22mm, front brace, top and bottom, rear brace). Spring rates are 50/30
Idea:
Front Camber 1,5-2 deg
Front Caster Maxed
Front Hight 340mm
Rear Camber 1-1,5 deg
Rear Caster NA
Rear Hight 342mm
Rear ToeOut 1mm (or 20 mins)
Kind regards,
Jesper
I just wanted to hear about the perfect setup for a Fast road & Trackday worrier.
(I have a set of AST sportline ii with cusco top plates, front swaybar 22mm, front brace, top and bottom, rear brace). Spring rates are 50/30
Idea:
Front Camber 1,5-2 deg
Front Caster Maxed
Front Hight 340mm
Rear Camber 1-1,5 deg
Rear Caster NA
Rear Hight 342mm
Rear ToeOut 1mm (or 20 mins)
Kind regards,
Jesper
26 January 2007, 01:27 AM
#2
Former Sponsor
iTrader: (2)
Join Date: Feb 2005
Location: workshop tel: 01787 275074
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
Perhaps good on a flat and dry track but I really wouldn't want to drive it in the wet.
I'm assuming your 20minutes toe out is 10 per side?
I'm assuming your 20minutes toe out is 10 per side?
Thread
Thread Starter
Forum
Replies
Last Post
danstee
General Technical
2
17 December 1998 10:17 AM