alignent readings
#1
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: GOOLE, EAST YORKSHIRE
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
alignent readings
dont understand hit a kerb before xmas repalce hub and rear strut had alignment checked and this is what they said. rear left camber 0.02 right rear camber -2.08 rear thrust angle -0.12 total toe left -0.16 and right0.08.is this bad or what cos i have not got a clue
#2
its not good,the main problem is the camber being out,you dont state what year/model it is but if they are all similar the rear camber should be about -1.5 and also they should be almost identical either side and yours it different by over -2 degree,also your toe on the rear is wrong as one is toeing in and one out which is gonna affect the thrust angle which is out,if you had it checked why didnt they adjust it or is that the best they could get it with adjustment??? if so then you still have something bent which needs replacing.
#4
cant find what settings should be for that model but like i say its not right so i would get it sorted,who checked the settings as surely if they have the equipment to check it then they have the ability to sort it??? also if your more concerned about the safety side of it i wouldn't say its dangerous to drive but it will corner better one way than the other and it will make your tyres wear unevenly.
#5
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: GOOLE, EAST YORKSHIRE
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
they said they is no camber blots so they can t a just it they missing but local dealer said told me that this model dose not ave them . ill take to local dealer and see what they find can t be alot cheers for advice
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM