Set of 52mm gauges & pod options
#1
Scooby Regular
Thread Starter
iTrader: (25)
Join Date: May 2007
Posts: 1,004
Likes: 0
Received 0 Likes
on
0 Posts
Set of 52mm gauges & pod options
Set of 52mm stepper motor gauges in as new condition complete with box, instructions and even has celephane display covers still fitted.
Black Face by Motor Meter gauges (i was told these were in effect the same as ProSport gauges), in full working order, came newly fitted to my Bugeye that I've just bought, but as the missus will drive this mostly don't want these distracting her.
3 gauges are:
Oil Temperature
Oil Pressure
Turbo Boost Pressure
The displays are black until powered up, and then go through a sweeping start-up dance.
They light up red or white depending if headlights are on/off, and have warning buzzers and max recall facility.
Oil temp/press sensors which are readily available will be required.
New oil temp/px fixing kit can be bought for £26 at: http://www.scoobyparts.com/cgi/sh000...KIT#aOIL_2fKIT
SOLD
______________________________
Newage dashtop triple 52mm gauge pod.
SOLD
______________________________
52mm 3 gauge single din unit for discrete gauge positioning in stereo placement.
£12 delivered.
Black Face by Motor Meter gauges (i was told these were in effect the same as ProSport gauges), in full working order, came newly fitted to my Bugeye that I've just bought, but as the missus will drive this mostly don't want these distracting her.
3 gauges are:
Oil Temperature
Oil Pressure
Turbo Boost Pressure
The displays are black until powered up, and then go through a sweeping start-up dance.
They light up red or white depending if headlights are on/off, and have warning buzzers and max recall facility.
Oil temp/press sensors which are readily available will be required.
New oil temp/px fixing kit can be bought for £26 at: http://www.scoobyparts.com/cgi/sh000...KIT#aOIL_2fKIT
SOLD
______________________________
Newage dashtop triple 52mm gauge pod.
SOLD
______________________________
52mm 3 gauge single din unit for discrete gauge positioning in stereo placement.
£12 delivered.
Last edited by MilleniumRacer; 13 December 2013 at 11:27 AM.
#3
Scooby Regular
Thread Starter
iTrader: (25)
Join Date: May 2007
Posts: 1,004
Likes: 0
Received 0 Likes
on
0 Posts
Not sure tbh VC. How are those sensors usually mounted, and do I need the original bolts etc to screw back into the threads after sensor removal?
All of the wiring & boost px transmitter is present, just the oil px & temp sensors/wires still fitted.
Brand new Oil temp/px fiiting kit can be bought for £26 here: http://www.scoobyparts.com/cgi/sh000...KIT#aOIL_2fKIT
Replacement temp/px senders and harness can also be purchased cheaply from Pro-sport or any stockist.
I don't have the cover plate for the 3rd cylinder which I'd need to re-fit to include the sender/loom, but if anyone local (Glasgow) wants to come and swap theirs over that'd be fine.
All of the wiring & boost px transmitter is present, just the oil px & temp sensors/wires still fitted.
Brand new Oil temp/px fiiting kit can be bought for £26 here: http://www.scoobyparts.com/cgi/sh000...KIT#aOIL_2fKIT
Replacement temp/px senders and harness can also be purchased cheaply from Pro-sport or any stockist.
I don't have the cover plate for the 3rd cylinder which I'd need to re-fit to include the sender/loom, but if anyone local (Glasgow) wants to come and swap theirs over that'd be fine.
Last edited by MilleniumRacer; 13 December 2013 at 09:06 AM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post