New 2.5 CDB, Wiseco pistons, modded oil pump, 2.5 crank, water pump
07 August 2013, 11:20 AM
#1
Scooby Regular
Thread Starter
Join Date: Feb 2007
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
New 2.5 CDB, Wiseco pistons, modded oil pump, 2.5 crank, water pump
Block and pistons are unused off my old engine, only selling as I've changed my mind and gone for a 2.35cc rather than the 2.5 which these parts are from. Engine was built but never ran. Other parts have had around one hrs use on the dyno so again virtually new.
Darryn - 01384 636459 / 07852 744911
Engine block 2.5ltr closed deck block, modified for rear thrust bearing conversion and 14mm head studs. Cost including all the machining work £1700, selling for £1000
79mm 2.5ltr stroker crank, reground .25 only had 2 hrs use on the dyno in my old engine. Cost me £550, selling for £300
Wiseco piston set, 99.5mm forged piston kit inc uprated pins. Good for over 700bhp and a great upgrade to any 2.5ltr Subaru engine. cost me £690, selling for £450
Modified 10mm oil pump, This Pump Has A Modified Oil Pressure Relief Valve And Uprated Oil Pressure For Road And Track Day Use. Cost me £168, selling for £120
Genuine Subaru water pump cost £84, selling for £40
Darryn - 01384 636459 / 07852 744911
Engine block 2.5ltr closed deck block, modified for rear thrust bearing conversion and 14mm head studs. Cost including all the machining work £1700, selling for £1000
79mm 2.5ltr stroker crank, reground .25 only had 2 hrs use on the dyno in my old engine. Cost me £550, selling for £300
Wiseco piston set, 99.5mm forged piston kit inc uprated pins. Good for over 700bhp and a great upgrade to any 2.5ltr Subaru engine. cost me £690, selling for £450
Modified 10mm oil pump, This Pump Has A Modified Oil Pressure Relief Valve And Uprated Oil Pressure For Road And Track Day Use. Cost me £168, selling for £120
Genuine Subaru water pump cost £84, selling for £40
07 August 2013, 08:09 PM
#3
Scooby Regular
Thread Starter
Join Date: Feb 2007
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Pennine Subaru did the machining on the block which is the reason I had it stripped and checked. As I am aiming for 700bhp I decided while it was apart to bite the bullet and go 2.35 for longevity which is the only reason all these parts are for sale. All parts can be thoroughly checked prior to buying if there are any concerns.
Trending Topics
28 September 2013, 11:58 AM
#8
Scooby Regular
Thread Starter
Join Date: Feb 2007
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
I will take £120 posted for the oil pump, I don't have any separate invoices for the parts as it was all bought as a complete engine, the only proof I have is by looking at it, you can clearly see the polished plunger.
Will take sensible offers on all parts, I need it all out the way
Thread
Thread Starter
Forum
Replies
Last Post