Sabelt Harnesses, Steering Wheel, Helmet Bags (Brand new)
#1
Scooby Regular
Thread Starter
iTrader: (24)
Join Date: May 2009
Location: STI V8 with 558bhp 580ft/lbs on V-Power (2.5 cdb)
Posts: 1,015
Likes: 0
Received 0 Likes
on
0 Posts
Sabelt Harnesses, Steering Wheel, Helmet Bags (Brand new)
Just got in another fresh supply of sabelt goodies if anyone’s interested, all brand new. Harnesses, steering wheels and helmet bags (can get other stuff, just ask for price):
Sabelt 6 point Harnesses. These are the rally twin packs, 3” straps, come with eye bolts etc brand new in box (pics are just of my own fitted). Full FIA. One of each colour available.
4 Point Twin Packs, , 3” straps, come with eye bolts etc brand new in box. Full FIA. One of each colour available:
Sabelt 3 point E-marked harnesses. Brand new, road legal. £55 for 1 harness, Blue only.
£100 for a pair.
Sabelt RAC 350mm Diameter with black anodised aluminium spokes, black suede wheel, complete with yellow centering ring/horn. 65mm dish.
£125 posted.
Sabelt Sardina 330mm flat 3 spoke wheel, in black suede black anodised spokes, complete with yellow centering ring/horn.
£130 posted.
Sabelt Helmet Bag. £33 posted
Lifeline Zero 2000 (AFFF) 1.75 ltr hand held foam fire extinguishers. These are brand new (not the ebay rubbish thats been on the shelf for 12 months). 372mm end to end, 108mm diameter, weigh approx 3.3kg. Come with bracket and two straps ready to bolt in car . Meets the MSA requirements for UK sprint, hillclimb, race (Some classes of historic car only) & rally events (In addition to a plumbed in system). £57.50 posted
All will be posted first class recorded delivery. All brand new.
Sabelt 6 point Harnesses. These are the rally twin packs, 3” straps, come with eye bolts etc brand new in box (pics are just of my own fitted). Full FIA. One of each colour available.
4 Point Twin Packs, , 3” straps, come with eye bolts etc brand new in box. Full FIA. One of each colour available:
Sabelt 3 point E-marked harnesses. Brand new, road legal. £55 for 1 harness, Blue only.
£100 for a pair.
Sabelt RAC 350mm Diameter with black anodised aluminium spokes, black suede wheel, complete with yellow centering ring/horn. 65mm dish.
£125 posted.
Sabelt Sardina 330mm flat 3 spoke wheel, in black suede black anodised spokes, complete with yellow centering ring/horn.
£130 posted.
Sabelt Helmet Bag. £33 posted
Lifeline Zero 2000 (AFFF) 1.75 ltr hand held foam fire extinguishers. These are brand new (not the ebay rubbish thats been on the shelf for 12 months). 372mm end to end, 108mm diameter, weigh approx 3.3kg. Come with bracket and two straps ready to bolt in car . Meets the MSA requirements for UK sprint, hillclimb, race (Some classes of historic car only) & rally events (In addition to a plumbed in system). £57.50 posted
All will be posted first class recorded delivery. All brand new.
Last edited by dave_garrett; 04 September 2011 at 11:46 AM.
Trending Topics
#9
Scooby Regular
iTrader: (6)
Join Date: Apr 2005
Location: Stroke it baby!
Posts: 33,828
Likes: 0
Received 0 Likes
on
0 Posts
How much posted mate, I'll wait to see if Dave responds first though mate as I fancied doing a deal with them and the wheel if he's up for it.
These will bolt into any car wont they? They are going into a MK2 Golf.
These will bolt into any car wont they? They are going into a MK2 Golf.
#10
Scooby Regular
Thread Starter
iTrader: (24)
Join Date: May 2009
Location: STI V8 with 558bhp 580ft/lbs on V-Power (2.5 cdb)
Posts: 1,015
Likes: 0
Received 0 Likes
on
0 Posts
Dave
#12
Sorry, I'm being a bit thick here, does the Impreza ( classic ) have holes already for the belts eye bolts?
I know there will be one either side of the seat where the seat belts mount, and 1 or 2 under back seat for baby seats... are these enough for the 4 or 6 point harness?
Thanks
I know there will be one either side of the seat where the seat belts mount, and 1 or 2 under back seat for baby seats... are these enough for the 4 or 6 point harness?
Thanks
#13
Scooby Regular
Join Date: Mar 2005
Location: www.surreyscoobies.co.uk
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Sorry, I'm being a bit thick here, does the Impreza ( classic ) have holes already for the belts eye bolts?
I know there will be one either side of the seat where the seat belts mount, and 1 or 2 under back seat for baby seats... are these enough for the 4 or 6 point harness?
Thanks
I know there will be one either side of the seat where the seat belts mount, and 1 or 2 under back seat for baby seats... are these enough for the 4 or 6 point harness?
Thanks
Use the eye bolts in the kit and they will fit into the base of the seat belt on the pillar side and on the inside you can use one of the actual seat fixings..... I hope that this makes sense.......
#14
Seat belt on door pillar and tunnel OK
Rears in the ISOfix for babyseats.
And the seat bolt holes .... I hadn't thought of that for the crotch straps!
Cheers, gonna look at those nice things up there again now.....
Rears in the ISOfix for babyseats.
And the seat bolt holes .... I hadn't thought of that for the crotch straps!
Cheers, gonna look at those nice things up there again now.....
#15
Scooby Regular
Thread Starter
iTrader: (24)
Join Date: May 2009
Location: STI V8 with 558bhp 580ft/lbs on V-Power (2.5 cdb)
Posts: 1,015
Likes: 0
Received 0 Likes
on
0 Posts
Rears fasterned to rear belt mounts (see below), you can retain the existing belts if you want to I chose to loose the lot (the eyebolts are slightly longer/extra thread):
Left side uses left rear rail mounting, right side uses bottom seat belt fasterning (again you can retain the seat belts if you want for everyday driving):
Hope this makes it clearer. If running six points I advise drilling trough the floor and fitting plates underneath (the eyelets bolt through the floor into the plates).All sabelt harnesses are quick release so you cn remove them easily and refit for trackdays with the eybolts left in situ.
Left side uses left rear rail mounting, right side uses bottom seat belt fasterning (again you can retain the seat belts if you want for everyday driving):
Hope this makes it clearer. If running six points I advise drilling trough the floor and fitting plates underneath (the eyelets bolt through the floor into the plates).All sabelt harnesses are quick release so you cn remove them easily and refit for trackdays with the eybolts left in situ.
#25
Scooby Regular
iTrader: (4)
Join Date: Jan 2005
Location: Devon
Posts: 736
Likes: 0
Received 0 Likes
on
0 Posts
Really dumb question time!
Is the diameter of the steering wheel taken on the outer of the wheels or in a centre line of the grip?
Also the same for the dish. Where are the measurements from?
Reaosn for asking is my wheel is a little under 350mm on the outer edge and a little over 300 on the centre line making it difficult to know what i already have!
Help is much appreciated....
Is the diameter of the steering wheel taken on the outer of the wheels or in a centre line of the grip?
Also the same for the dish. Where are the measurements from?
Reaosn for asking is my wheel is a little under 350mm on the outer edge and a little over 300 on the centre line making it difficult to know what i already have!
Help is much appreciated....
#28
Scooby Regular
Thread Starter
iTrader: (24)
Join Date: May 2009
Location: STI V8 with 558bhp 580ft/lbs on V-Power (2.5 cdb)
Posts: 1,015
Likes: 0
Received 0 Likes
on
0 Posts
Really dumb question time!
Is the diameter of the steering wheel taken on the outer of the wheels or in a centre line of the grip?
Also the same for the dish. Where are the measurements from?
Reaosn for asking is my wheel is a little under 350mm on the outer edge and a little over 300 on the centre line making it difficult to know what i already have!
Help is much appreciated....
Is the diameter of the steering wheel taken on the outer of the wheels or in a centre line of the grip?
Also the same for the dish. Where are the measurements from?
Reaosn for asking is my wheel is a little under 350mm on the outer edge and a little over 300 on the centre line making it difficult to know what i already have!
Help is much appreciated....
#29
Scooby Senior
iTrader: (3)
Join Date: Jun 2006
Location: Slowly rebuilding the kit of bits into a car...
Posts: 14,333
Likes: 0
Received 0 Likes
on
0 Posts
Hi Dave, do you know the PCD of ->
Sabelt Sardina 330mm flat 3 spoke wheel, in black suede black anodised spokes, complete with yellow centering ring/horn.
Please !
dunx
Sabelt Sardina 330mm flat 3 spoke wheel, in black suede black anodised spokes, complete with yellow centering ring/horn.
Please !
dunx
#30
Scooby Regular
Thread Starter
iTrader: (24)
Join Date: May 2009
Location: STI V8 with 558bhp 580ft/lbs on V-Power (2.5 cdb)
Posts: 1,015
Likes: 0
Received 0 Likes
on
0 Posts
There 70mm pcd, have a look at the following, think there's a pic on the first page:
https://www.scoobynet.com/showthread.php?t=871682
Dave