2004 STI TYPE UK 448bhp / 404lbs LOW MILES, PRIVATE PLATE, XXR'S, HUGE SPEC
#1
Scooby Regular
Thread Starter
iTrader: (8)
Join Date: Aug 2013
Location: Bolton
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
2004 STI TYPE UK 448bhp / 404lbs LOW MILES, PRIVATE PLATE, XXR'S, HUGE SPEC
For sale my STI Type UK in sonic blue. Just put 448BHP and 404 Lb/ft down a few weeks ago at John Clarkson in Bolton. Just ticked over the 65,000 miles mark, for the asking price I will put 12 months MOT on the car and 6 Months road tax! Car is in very good condition as you can see from the pics and I am sure Brian @ CAMS performance (knows the car very well) and Andy Carr (mapper) will vouch for the car if you want to contact them. Both Andy and John Clarkson motorsport (when dyno'd) have commented on the engine being one of, if not the quietest engine they have come across!
I suggest you read my project blog which details all the spec, work I have had done and maintenance I have conducted:-
https://www.scoobynet.com/projects-4...obeye-log.html
Ok the main spec is as follows:-
ENGINE
MDX321 T Billet with V wheel, reworked exhaust housing and zircotec ceramic coated.
Adapted Turbo heat shield
3 bar boost solenoid
850cc Injectors
Sytec Fuel pressure regulator with gauge
Walbro 450 LPH Fuel pump
GT spec headers heat wrapped
Harvey Smith 3 bolt up pipe
Open mouthed 3" downpipe
Buddy Club straight through exhaust
HID front mount intercooler
HKS thermostatically controlled oil cooler with cold air feed pipe
Samco Turbo pipe
Eclipse full silicone hose / pipe kit
NGK grade 7 plugs
AC delete / Removal
Carbon Fibre Slam panel
K&N Cold air intake located in inner wing
Cold air feed pipe to filter
CDF light weight pulleys
Group N uprated engine mounts with pitching stopper
3 port oil catch can
APEXI Auto timer
Thermal spacers on the header tank
GEARBOX
6 Speed
6 puck EXEDY paddle clutch
Group N uprated gearbox mount
ECU
Andy Carr mapped (including High / Low boost, Meth mix, Anti Lag and Launch control)
3 bar boost solenoid
MAF delete
SUSPENSION
APEX BC coilovers
Whiteline ant lift kit
Whiteline anti roll bars
Whiteline Drop links
Whiteline bushes
BRAKES
Performance Friction bell & rotor front discs
Godspeed rear grooved discs
Performance pads all round
Brembo calipers
WHEELS & TYRES
XXR 527's 18" x 8.75 in Chrome Black
Toyo T1 sports tyres all round (nitrogen filled)
EXTERIOR
Front splitter
Black reverse scoop
De-tango'd front lights with black light bezel change
De badged front grill
De badged rear boot
Perrin wing stiffi's
Window tints
Small front plate
Cut out bumper to increase FMIC flow
Rally mud flaps
Private Plate
INTERIOR
DEFI gauges and pod with controller (oil temp & pressure and boost)
Carbon Fibre dash trim
PERFORMANCE
448 BHP / 404 Lb/Ft (Dyno'd November 2013)
I have spent several thousand £ on the car since my ownership, the wheels and tyres have only covered about 2,000 miles, Turbo is less then 12 months old and is still in warrantee I believe. This car was standard until around 13 months ago @ 58,000 miles.
Car has a tracker fitted and also an aftermarket alarm system.
Much loved and I am sure I will regret selling her but an opportunity has arisen meaning I need some funds out of the car.
£8995
Any questions fire me a PM
I suggest you read my project blog which details all the spec, work I have had done and maintenance I have conducted:-
https://www.scoobynet.com/projects-4...obeye-log.html
Ok the main spec is as follows:-
ENGINE
MDX321 T Billet with V wheel, reworked exhaust housing and zircotec ceramic coated.
Adapted Turbo heat shield
3 bar boost solenoid
850cc Injectors
Sytec Fuel pressure regulator with gauge
Walbro 450 LPH Fuel pump
GT spec headers heat wrapped
Harvey Smith 3 bolt up pipe
Open mouthed 3" downpipe
Buddy Club straight through exhaust
HID front mount intercooler
HKS thermostatically controlled oil cooler with cold air feed pipe
Samco Turbo pipe
Eclipse full silicone hose / pipe kit
NGK grade 7 plugs
AC delete / Removal
Carbon Fibre Slam panel
K&N Cold air intake located in inner wing
Cold air feed pipe to filter
CDF light weight pulleys
Group N uprated engine mounts with pitching stopper
3 port oil catch can
APEXI Auto timer
Thermal spacers on the header tank
GEARBOX
6 Speed
6 puck EXEDY paddle clutch
Group N uprated gearbox mount
ECU
Andy Carr mapped (including High / Low boost, Meth mix, Anti Lag and Launch control)
3 bar boost solenoid
MAF delete
SUSPENSION
APEX BC coilovers
Whiteline ant lift kit
Whiteline anti roll bars
Whiteline Drop links
Whiteline bushes
BRAKES
Performance Friction bell & rotor front discs
Godspeed rear grooved discs
Performance pads all round
Brembo calipers
WHEELS & TYRES
XXR 527's 18" x 8.75 in Chrome Black
Toyo T1 sports tyres all round (nitrogen filled)
EXTERIOR
Front splitter
Black reverse scoop
De-tango'd front lights with black light bezel change
De badged front grill
De badged rear boot
Perrin wing stiffi's
Window tints
Small front plate
Cut out bumper to increase FMIC flow
Rally mud flaps
Private Plate
INTERIOR
DEFI gauges and pod with controller (oil temp & pressure and boost)
Carbon Fibre dash trim
PERFORMANCE
448 BHP / 404 Lb/Ft (Dyno'd November 2013)
I have spent several thousand £ on the car since my ownership, the wheels and tyres have only covered about 2,000 miles, Turbo is less then 12 months old and is still in warrantee I believe. This car was standard until around 13 months ago @ 58,000 miles.
Car has a tracker fitted and also an aftermarket alarm system.
Much loved and I am sure I will regret selling her but an opportunity has arisen meaning I need some funds out of the car.
£8995
Any questions fire me a PM
#5
Scooby Regular
Thread Starter
iTrader: (8)
Join Date: Aug 2013
Location: Bolton
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the positive comments guys, its appreciated.
PM's replied to.
Also I am happy to offer part exchange as my day job is a car dealer but please understand will have to be at trade prices as my business will effectively be buying the part exchange.
PM's replied to.
Also I am happy to offer part exchange as my day job is a car dealer but please understand will have to be at trade prices as my business will effectively be buying the part exchange.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post