When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
How have you tested yours i think mine could be faulty do you have any symptoms of a faulty maf
Mine turned out to be dirty, I just removed it and gave it a quick spray with Maplin Electrical Cleaner. I could see the elements were dirty and afterwards they were white(ish). Runs like a different car now, give it a shot before buying a new MAF.
It was hesitating off boost and bogging down. All gone now
So i took the under scoop off the bonnet, quite fancied not putting it back, but wasn't sure if to much water might get in, so just went with more silent coat and put the scoop back after.
Again can't stress enough how good this stuff is, noticeable difference each time i put some on the car. This is the lighter 2mm product, bonnet still lifts fine.
Anyone looking for a clear rear cluster to replace there nasty rear fog. I have two in stock for immediate dispatch, Getting harder to get hold of at the moment. I've waited quite a while for these two £71 posted with the dreaded vat
Anyone looking for a clear rear cluster to replace there nasty rear fog. I have two in stock for immediate dispatch, Getting harder to get hold of at the moment. I've waited quite a while for these two £71 posted with the dreaded vat
Anyone looking for a clear rear cluster to replace there nasty rear fog. I have two in stock for immediate dispatch, Getting harder to get hold of at the moment. I've waited quite a while for these two £71 posted with the dreaded vat
Trial fitted my strut brace, will be painting the ends . . . . .probably.
Has anyone else fitted one of this "ebay" type strut braces ? My cross bar sits on top of the bodywork , and is actually forced tight down on it to allow me to attach the bar to the ends. Does that sound ok ? Seems wrong to me but want to know before leaving feedback.
Are you getting the tint overlays for the lights from Salsa-king? If so he can supply a bulb
No. Tried that twice already and don't have the skill / patience to pull it off. I coloured my existing units with fine detail masking tape and E-Tech tint.
Has anyone else fitted one of this "ebay" type strut braces ? My cross bar sits on top of the bodywork , and is actually forced tight down on it to allow me to attach the bar to the ends. Does that sound ok ? Seems wrong to me but want to know before leaving feedback.
I didn't get mine from eBay though I believe they are sold on there. I use an M2 strut bar which are highly thought of by the BMW forums, looks very similar to yours.
It does not rub on any of the trim or bodywork though gets close to it. Here are a few pics of mine.
I didn't get mine from eBay though I believe they are sold on there. I use an M2 strut bar which are highly thought of by the BMW forums, looks very similar to yours.
It does not rub on any of the trim or bodywork though gets close to it. Here are a few pics of mine.
put it back on ebay and buy one that you know fits and works as it should