GODSPEED
#4
I've got the Godspeed discs and orange stuff pads front an rear. Wasn't too sure at first. But there actually very good good when bedded in properly.
Pads need to be warmed up abit, but they don't let go when hot an smokey. Thumbs up from me.
Think I need some better brake fluid, an some braided lines though. Pedal go's spongy when pushed very hard...
Pads need to be warmed up abit, but they don't let go when hot an smokey. Thumbs up from me.
Think I need some better brake fluid, an some braided lines though. Pedal go's spongy when pushed very hard...
#7
Just picked mine up having had a full set off grooved discs and Kevlar pads fitted. Finally got rid of the terrible vibration. Initially thought it was the rears causing the issue, turned out it was the fronts, even though they were brand new in Feb and only seen 2000 miles!! According to my mechanic, they (very well known Subaru specialist) did a terrible job of fitting the last discs and pads. Hubs were caked in ****e and not cleaned properly, pads were ground down in places to get them to fit, rather than cleaning the calipers. Clearly contributed to the warping issue!!
Trending Topics
#8
Scooby Senior
look good, have you gone front and rear?
pix when fitted please
pix when fitted please
#17
Scooby Regular
iTrader: (2)
Join Date: Jul 2005
Location: Sometimes Bute, sometimes Renfrew
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
Got the Godspeed 330 discs on with my ap's I have done about 4k on the discs. Seemed ok when I first got them but now the feel like a lump of wood. They are fitted with ds2500 pads with ap 6pots. They will be getting put in the bin and replaced with ap rotors (only because the performance friction ones are not in stock at the mo) pay cheap buy twice :-(
#18
THE braking specialist
iTrader: (259)
Got the Godspeed 330 discs on with my ap's I have done about 4k on the discs. Seemed ok when I first got them but now the feel like a lump of wood. They are fitted with ds2500 pads with ap 6pots. They will be getting put in the bin and replaced with ap rotors (only because the performance friction ones are not in stock at the mo) pay cheap buy twice :-(
If you feel you need to spend money on discs you don't need , I have a pair of PF 330mm discs in stock
Cheers Ian
#19
Former Sponsor
iTrader: (4)
Got the Godspeed 330 discs on with my ap's I have done about 4k on the discs. Seemed ok when I first got them but now the feel like a lump of wood. They are fitted with ds2500 pads with ap 6pots. They will be getting put in the bin and replaced with ap rotors (only because the performance friction ones are not in stock at the mo) pay cheap buy twice :-(
not sure who has told you there is no stock of PFC 330mm rotors??
there is definately factory stock and also as one of the largest PFC distributors it is a regular stock item for us also............
0191-4103770
#20
Scooby Regular
iTrader: (2)
Join Date: Jul 2005
Location: Sometimes Bute, sometimes Renfrew
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
I should have said I was also taking the opportunity to upgrade to the larger disc and it was that disc that was temporally out of stock hence going the AP route
Graeme
Graeme
Thread
Thread Starter
Forum
Replies
Last Post
JoelR
Wheels, Tyres & Brakes
6
23 December 2001 03:46 AM