on the rollers today
23 February 2013, 09:09 PM
#1
Scooby Regular
Thread Starter
Join Date: Oct 2012
Location: southport
Posts: 673
Likes: 0
Received 0 Likes
on
0 Posts
on the rollers today
went down to the rollers today with a few others from LADSOC take a look at the vid and the comments of what we thought it would do to what it actually did and the sound of surprise
http://s665.beta.photobucket.com/use..._1977.mp4.html
its still on standard turbo and injectors
http://s665.beta.photobucket.com/use..._1977.mp4.html
its still on standard turbo and injectors
23 February 2013, 09:12 PM
#2
I know how this thread is going to go.....Anyone remember the 373bhp from a VF35 thread. So before anyone starts it was me that filmed it 
Great figures but an extremely rare occurrence
Great figures but an extremely rare occurrence
Last edited by The Pink Ninja; 23 February 2013 at 09:13 PM.
still on a standard set up
Trending Topics
23 February 2013, 09:33 PM
#13
There was a thread a while back where a guy claimed to get 373bhp out of his VF35 and it turned into a bit of a slanging match as people basically said he was full of $hite and wouldnt believe that a VF35 was capable of that power...We will have none of that in this thread
Anyway get a list of your mods up that you have fittted
Anyway get a list of your mods up that you have fittted
23 February 2013, 09:41 PM
#17
Scooby Regular
Thread Starter
Join Date: Oct 2012
Location: southport
Posts: 673
Likes: 0
Received 0 Likes
on
0 Posts
Oh ok ! At least I've got some back up !
Mods I'm running nur spec exhaust - toyo headers ( everyone slates them I know ) as the came on the car , unknown down pipe 3" goes to 2.75" harvey FMIC - made 335 on same rollers without FMIC and Andrew car map. Got it mapped again after FMIC fitted again by Andrew Carr, it was mapped on momentum - today it had momentum - texico - and BP fuel in ! Lol
Mods I'm running nur spec exhaust - toyo headers ( everyone slates them I know ) as the came on the car , unknown down pipe 3" goes to 2.75" harvey FMIC - made 335 on same rollers without FMIC and Andrew car map. Got it mapped again after FMIC fitted again by Andrew Carr, it was mapped on momentum - today it had momentum - texico - and BP fuel in ! Lol
23 February 2013, 09:45 PM
#20
Scooby Regular
iTrader: (10)
Join Date: Apr 2010
Location: preston
Posts: 2,081
Likes: 0
Received 0 Likes
on
0 Posts
Oh ok ! At least I've got some back up !
Mods I'm running nur spec exhaust - toyo headers ( everyone slates them I know ) as the came on the car , unknown down pipe 3" goes to 2.75" harvey FMIC - made 335 on same rollers without FMIC and Andrew car map. Got it mapped again after FMIC fitted again by Andrew Carr, it was mapped on momentum - today it had momentum - texico - and BP fuel in ! Lol
Mods I'm running nur spec exhaust - toyo headers ( everyone slates them I know ) as the came on the car , unknown down pipe 3" goes to 2.75" harvey FMIC - made 335 on same rollers without FMIC and Andrew car map. Got it mapped again after FMIC fitted again by Andrew Carr, it was mapped on momentum - today it had momentum - texico - and BP fuel in ! Lol
easy on the fuel coctail
23 February 2013, 09:46 PM
#21
Scooby Regular
Join Date: Nov 2011
Location: stoke-on-trent
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Oh ok ! At least I've got some back up !
Mods I'm running nur spec exhaust - toyo headers ( everyone slates them I know ) as the came on the car , unknown down pipe 3" goes to 2.75" harvey FMIC - made 335 on same rollers without FMIC and Andrew car map. Got it mapped again after FMIC fitted again by Andrew Carr, it was mapped on momentum - today it had momentum - texico - and BP fuel in ! Lol
Mods I'm running nur spec exhaust - toyo headers ( everyone slates them I know ) as the came on the car , unknown down pipe 3" goes to 2.75" harvey FMIC - made 335 on same rollers without FMIC and Andrew car map. Got it mapped again after FMIC fitted again by Andrew Carr, it was mapped on momentum - today it had momentum - texico - and BP fuel in ! Lol
23 February 2013, 10:08 PM
#23
Scooby Regular
Thread Starter
Join Date: Oct 2012
Location: southport
Posts: 673
Likes: 0
Received 0 Likes
on
0 Posts
23 February 2013, 10:12 PM
#24
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
The slated VF35 was actually ported which is why it made better power, really though I dont take much notice of the figures unless the car runs the same dyno on different days and if the figures are similar then to me its more like it rather than a bad connection or slip on the rollers.
Seeing the same car 4-5 years between runs on the same rollers pull within 4bhp sort of does it for me though
Seeing the same car 4-5 years between runs on the same rollers pull within 4bhp sort of does it for me though
23 February 2013, 10:23 PM
#27
Scooby Regular
Thread Starter
Join Date: Oct 2012
Location: southport
Posts: 673
Likes: 0
Received 0 Likes
on
0 Posts
Lol I know it's normally on momentum all the time as that's what it was mapped on- just circumstances today ! I did brim it when I got back !
23 February 2013, 10:38 PM
#29
Scooby Regular
iTrader: (12)
Join Date: Mar 2005
Location: Stoke
Posts: 829
Likes: 0
Received 0 Likes
on
0 Posts
So by fitting a FMIC and running....
You gained 44bhp 
As Tony has already said, poor connection with the rollers (not being strapped down correctly can make a difference)
From the mods stated and fuel used on the day it just seems like the figures are a little misleading, but if your like the numbers and the cars drives well then that's what counts
what rollers were used by the way?
As Tony has already said, poor connection with the rollers (not being strapped down correctly can make a difference)
From the mods stated and fuel used on the day it just seems like the figures are a little misleading, but if your like the numbers and the cars drives well then that's what counts
what rollers were used by the way?