Blob90

iTrader: (8)

Anyone know about airbag wiring and ecu.
can i remove the air bag wiring and ecu as have jdm dash with double glove box and changing steering wheel?
if i do so will the airbag light stay on? if i leave it in will the airbag light stay on because dont have a passenger airbag?
Cheers in advance for any info.

The Trooper 1815

iTrader: (31)

I assume your talking about a Classic?

Yes you can - face lift for facelift, pre-facelift for pre-facelift - but you will need to by some 12v resistors from Maplins or the like to stop the warning lights illuminating.

nick!

iTrader: (4)

Or take the dials out and remove the bulb which illuminates the airbag warning.

Nick.

TonyBurns

iTrader: (3)

Airbag warning lights are now an MOT failure, removal may have changed due to the changes to the laws to the MOT.

Tony

The Trooper 1815

iTrader: (31)

Tony,

As I understand it unless they are supposed to, they must not be "constant" after the ignition phase.

ronjeramy

iTrader: (1)

Can you retro fit a passenger airbag into a version 5 classic where the cubby is? I'm presuming there's a plug for it?

Blob90

iTrader: (8)

yeah facelift classic and will get down to maplins
cheers

Blob90

iTrader: (8)

Going on my wiring mate yeah you should a plug under the cubby ready for it?

Thanks everyone for helpful replys

spuker1

I have called my garage where I just did MOT and asked them: "I want to change my steering wheel for one without and airbag, is the SRS light staying on an MOT failure or is it just rumors" and the guy said: "It's just the rumor, SRS light on dash staying on isn't an MOT fail and the law might or might not come in next April (or some month early summer, I can't remember which one he said)"

So.... Put a piece of tape over it and job done!