Scoobyworld Remap
#1
Scooby Regular
Thread Starter
Scoobyworld Remap
Hello all,
Had my STi 2007 2.5 remapped at Scoobyworld by Neil today, started off with 296.5 Bhp and is sitting now at 345.6 Bhp with 370 lb/ft torque, that was a decat, walbro 255, K&N and EcuTek, previous to that only mods were H&S Non-Res centre section, Turbosmart Dual Port BOV and Scoobyparts Tornado 2 rear silencer.
Overall a very good service from Neil at Scoobyworld, he was tuning on the err of caution with the potential issues the 2.5's can get without forged internals which I totally appreciated as it is my everyday driver.
I will post up the Dyno Charts when I get them, anybody else had similar results from a 2.5 STi?
A big thanks to Neil, looking forward to picking it up tomorrow!
Had my STi 2007 2.5 remapped at Scoobyworld by Neil today, started off with 296.5 Bhp and is sitting now at 345.6 Bhp with 370 lb/ft torque, that was a decat, walbro 255, K&N and EcuTek, previous to that only mods were H&S Non-Res centre section, Turbosmart Dual Port BOV and Scoobyparts Tornado 2 rear silencer.
Overall a very good service from Neil at Scoobyworld, he was tuning on the err of caution with the potential issues the 2.5's can get without forged internals which I totally appreciated as it is my everyday driver.
I will post up the Dyno Charts when I get them, anybody else had similar results from a 2.5 STi?
A big thanks to Neil, looking forward to picking it up tomorrow!
#5
Scooby Regular
Thread Starter
Aye! I'm looking forward to seeing them too! Ill post up the dynos graphs as soon as I get them!
Neil said I was running pretty rich to begin with and also that my Turbosmart BOV had a leaking gasket so it threw things off a bit! I really can't wait to get it back tomorrow! Hehe
Neil said I was running pretty rich to begin with and also that my Turbosmart BOV had a leaking gasket so it threw things off a bit! I really can't wait to get it back tomorrow! Hehe
Trending Topics
#8
Scooby Regular
Thread Starter
#9
Scooby Regular
Thread Starter
#12
Scooby Regular
Thread Starter
Im blown away by the difference in the car after the decat remap work! Its super impressive! I cant imagine what it would be like with forged internals and the boost cranked up further!
#14
Scooby Regular
Thread Starter
#15
Scooby Regular
iTrader: (2)
Join Date: Apr 2010
Location: Melton Mowbray, Leics
Posts: 614
Likes: 0
Received 0 Likes
on
0 Posts
Bout 12 ish. No picked up a decat centre, plugs and strut brace. A couple more jobs to do before map tweak. It must of been yours they were pulling out of workshop as i left, rumbling nicely
#16
Scooby Regular
Thread Starter
Ahh gotchya! I was on the train down to pick the car up about then, I was like a frustrated kid waiting to get the car! Was good speaking to Neil though as I had a lot of questions regarding tuning
#18
Scooby Regular
Thread Starter
What...Scoobynet discount! Haha! Im sure Neil can explain this one when he sees this thread, I sent him an email linking it up!
On another note, Neil can you check your workshop for a Cigarette adapter Blackberry charger with a coily lead! Mines gone missin out the car, maybe it got caught up with your mapping kit?! I couldnt text anybody on the move up how good the car felt as my phone was dead lol!
#19
Sponsor
iTrader: (4)
Join Date: Feb 2010
Location: Full Workshop facilities - EcuTek Remapping - Huge Range of Performance Parts
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Hi
Glad you're happy with the performance, it went extremely well on the test drive after mapping
I'll have a look on Monday for your phone charger, we have a similar one that we plug into the cigarette charger, and powers the Dyno handset so it's almost certain to be swept up into our mapping kit afterwords unfortunately . If so I'll courier it out on Monday if that's ok?
I did give you a bit of a SN discount - we didn't charge for the fuel pump
Gave a good weekend and thanks for coming down to us.
Cheers
Neil
Glad you're happy with the performance, it went extremely well on the test drive after mapping
I'll have a look on Monday for your phone charger, we have a similar one that we plug into the cigarette charger, and powers the Dyno handset so it's almost certain to be swept up into our mapping kit afterwords unfortunately . If so I'll courier it out on Monday if that's ok?
I did give you a bit of a SN discount - we didn't charge for the fuel pump
Gave a good weekend and thanks for coming down to us.
Cheers
Neil
#20
Scooby Regular
Thread Starter
Hi
Glad you're happy with the performance, it went extremely well on the test drive after mapping
I'll have a look on Monday for your phone charger, we have a similar one that we plug into the cigarette charger, and powers the Dyno handset so it's almost certain to be swept up into our mapping kit afterwords unfortunately . If so I'll courier it out on Monday if that's ok?
I did give you a bit of a SN discount - we didn't charge for the fuel pump
Gave a good weekend and thanks for coming down to us.
Cheers
Neil
Glad you're happy with the performance, it went extremely well on the test drive after mapping
I'll have a look on Monday for your phone charger, we have a similar one that we plug into the cigarette charger, and powers the Dyno handset so it's almost certain to be swept up into our mapping kit afterwords unfortunately . If so I'll courier it out on Monday if that's ok?
I did give you a bit of a SN discount - we didn't charge for the fuel pump
Gave a good weekend and thanks for coming down to us.
Cheers
Neil
Aye I thought you might have accidently mixed it up in with the mapping kit wasn't sure though! If you find it send it on up please! Modern phones have a crap life.
Will buy all my tuning parts off you in future! Thanks again
#21
Scooby Regular
iTrader: (2)
Join Date: Jan 2012
Location: Staffordshire
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Big +1 for Scoobyworld
Always get great service and excellent advice.
Hope to get my Scoobynet discount in the next few months when my routine service is due and if I can get the finances together an uprated fuel pump and remap. (Fingers crossed)
Always get great service and excellent advice.
Hope to get my Scoobynet discount in the next few months when my routine service is due and if I can get the finances together an uprated fuel pump and remap. (Fingers crossed)
#23
Scooby Regular
Hello all,
Had my STi 2007 2.5 remapped at Scoobyworld by Neil today, started off with 296.5 Bhp and is sitting now at 345.6 Bhp with 370 lb/ft torque, that was a decat, walbro 255, K&N and EcuTek, previous to that only mods were H&S Non-Res centre section, Turbosmart Dual Port BOV and Scoobyparts Tornado 2 rear silencer.
Overall a very good service from Neil at Scoobyworld, he was tuning on the err of caution with the potential issues the 2.5's can get without forged internals which I totally appreciated as it is my everyday driver.
I will post up the Dyno Charts when I get them, anybody else had similar results from a 2.5 STi?
A big thanks to Neil, looking forward to picking it up tomorrow!
Had my STi 2007 2.5 remapped at Scoobyworld by Neil today, started off with 296.5 Bhp and is sitting now at 345.6 Bhp with 370 lb/ft torque, that was a decat, walbro 255, K&N and EcuTek, previous to that only mods were H&S Non-Res centre section, Turbosmart Dual Port BOV and Scoobyparts Tornado 2 rear silencer.
Overall a very good service from Neil at Scoobyworld, he was tuning on the err of caution with the potential issues the 2.5's can get without forged internals which I totally appreciated as it is my everyday driver.
I will post up the Dyno Charts when I get them, anybody else had similar results from a 2.5 STi?
A big thanks to Neil, looking forward to picking it up tomorrow!
#26
Scooby Regular
Thread Starter
#28
Scooby Regular
Join Date: Jan 2012
Location: Hampshire
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
I've got 06 hawk Sti , and on stock turbo Simon managed to get
350.8 bhp 400 of torque and 1.55 bar
Mods were :
K&N short ram intake
Fully decat
Walbro 255 pump
Prodrive backbox
I even got switchable maps - standard & custom
350.8 bhp 400 of torque and 1.55 bar
Mods were :
K&N short ram intake
Fully decat
Walbro 255 pump
Prodrive backbox
I even got switchable maps - standard & custom
Last edited by Streetracersti; 04 November 2012 at 10:03 AM.
Thread
Thread Starter
Forum
Replies
Last Post