2002 BUGEYE WAGON COIL PACKS WANTED
#1
Scooby Regular
Thread Starter
Join Date: Jun 2011
Location: NOTTINGHAM
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
2002 BUGEYE WAGON COIL PACKS WANTED
I HOPE SOMEONE CAN HELP.....
Im after at least 2 coil packs for my wrx wagon 2002 model
eml on and fault codes say 2 packs are down :0(
also looking for some sti clocks if someone has them going at a good price
Im after at least 2 coil packs for my wrx wagon 2002 model
eml on and fault codes say 2 packs are down :0(
also looking for some sti clocks if someone has them going at a good price
#3
Scooby Regular
Join Date: Sep 2009
Location: Taunton
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
I've got a set of coil packs if you need a couple. As said above misfire codes can be manifested for other reasons in particular Neutral Position Switch on a Bugeye.
#4
Scooby Regular
Thread Starter
Join Date: Jun 2011
Location: NOTTINGHAM
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
a friend of mine plugged the bugeye into his code reader
it said no1 coilpack had something wrong with it, it may have been misfire.
he cleared the faults and the eml didnt illuminate for the rest of the night.
the next day the eml flashed while i drove 3 miles to work. after work the eml was on permanently and the car does seen like its holding back
it said no1 coilpack had something wrong with it, it may have been misfire.
he cleared the faults and the eml didnt illuminate for the rest of the night.
the next day the eml flashed while i drove 3 miles to work. after work the eml was on permanently and the car does seen like its holding back
#5
Scooby Regular
Join Date: Sep 2009
Location: Taunton
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like NPS to me. I had the same on my "02" Bugeye.
Got mine here
http://www.importcarparts.co.uk/part...ition%20switch
Easier to change one switch than swap coil packs about.
Got mine here
http://www.importcarparts.co.uk/part...ition%20switch
Easier to change one switch than swap coil packs about.
#7
Scooby Regular
Join Date: Sep 2009
Location: Taunton
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
For some unknown reason the switch changes state when the gearbox is under load and sends an incorrect signal to the ECU that flags it up as a misfire.
Loads of threads.search "Neutral Position Switch" or "NPS"
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM
aaron_ions
General Technical
1
17 September 2015 10:42 AM