mint hawkeye with no engine but alot of goodies
14 July 2011, 11:33 PM
#1
Scooby Regular
Thread Starter
iTrader: (10)
Join Date: Oct 2003
Location: berks
Posts: 1,174
Likes: 0
Received 0 Likes
on
0 Posts
mint hawkeye with no engine but alot of goodies
hi all im after some advice as to what this is worth.
this car was first built by api and had 460 bhp and 480lbsft torque.
there is no engine whats so ever with the car only ancillaries like starter and alternator engine mounts and most bolts
43000 miles and very very clean
2006 hawkeye sti in black
6 speed dccd gearbox
solaris ecu
brand new wheels pff7 replicas in anthrasite
ap 4 pot brakes on the rear (black calipers)
ap 6 pots on the front (black calipers)
uprated fuel pump
inlet manifold with 10mm spacers fuel pressure regulator and braided lines
oil,boost,water 60mm defi black faced gauges
lateral performance headers
oil cooler proffessionaly fitted but no pipe work
hybrid front mount intercooler
brand new wheels pff7 replicas in anthrasite with nearly new toyo proxys
perrin wing stiffis
nearly new revolution middle and rear exhaust
cheers mickyboy
this car was first built by api and had 460 bhp and 480lbsft torque.
there is no engine whats so ever with the car only ancillaries like starter and alternator engine mounts and most bolts
43000 miles and very very clean
2006 hawkeye sti in black
6 speed dccd gearbox
solaris ecu
brand new wheels pff7 replicas in anthrasite
ap 4 pot brakes on the rear (black calipers)
ap 6 pots on the front (black calipers)
uprated fuel pump
inlet manifold with 10mm spacers fuel pressure regulator and braided lines
oil,boost,water 60mm defi black faced gauges
lateral performance headers
oil cooler proffessionaly fitted but no pipe work
hybrid front mount intercooler
brand new wheels pff7 replicas in anthrasite with nearly new toyo proxys
perrin wing stiffis
nearly new revolution middle and rear exhaust
cheers mickyboy
15 July 2011, 08:42 AM
#2
I would say and you won't like it but, whatever the cost of a running hawkeye of similar miles etc minus the cost of supplying and fitting an engine. Issue is most will want to pop a forged lump in it as its already out. So knock 4-5k for off the price and there is your answer, I would also hope it to be even a little cheaper as a recovery truck would be needed to pick up and drop off at s garage of my choice plus there will be odds and ends that are not on a replacement engine that will be needs like hoses, gaskets and seals etc so you may need to make it even cheaper as there coukd be a lot of ball ache in it. Just my opinion mate but what might bring the price up is the mods you have fitted to the car, especially the brakes
15 July 2011, 12:00 PM
#3
Scooby Regular
iTrader: (13)
Join Date: Apr 2005
Location: Lincs
Posts: 908
Likes: 0
Received 0 Likes
on
0 Posts
What thieving scum bag stole your engine!?!
For best price you need to either fit another engine or break for spares (if you break it then first dibs on the AP rears!)
For best price you need to either fit another engine or break for spares (if you break it then first dibs on the AP rears!)
15 July 2011, 02:54 PM
#6
Moderator
iTrader: (4)
Join Date: Jul 2004
Location: The Terry Crews of moderation. P P P P P P POWER!!
Posts: 18,687
Likes: 0
Received 0 Likes
on
0 Posts
Yep, certainly looks like it!
Best thing to do here would be to put the engine the car needs into it, as you already have some of the ancilliaries required for a 450/450 conversion, which is very good indeed!
Ns04
Best thing to do here would be to put the engine the car needs into it, as you already have some of the ancilliaries required for a 450/450 conversion, which is very good indeed!
Ns04
Trending Topics
15 July 2011, 04:51 PM
#9
Scooby Regular
Join Date: Jun 2008
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
Does look clean etc but for someone to be interested would have to be a competitive price to make it worth while. I mean why spend say x amount on a shell + x amount on engine, odds and labour when for that total can get a complete unit else where and prices seem stupidly cheap at present.
Still would make one great track/time trial base car!
Still would make one great track/time trial base car!
15 July 2011, 05:54 PM
#10
Scooby Regular
Thread Starter
iTrader: (10)
Join Date: Oct 2003
Location: berks
Posts: 1,174
Likes: 0
Received 0 Likes
on
0 Posts
i agree with you scotty it is mint apart from the odd little mark. paintwork gleams. i have got loads of pics but seems pointless putting them up until somebody wants to see them.
the car has got a fair few bits on it and if iwas to to break it i would get a lot of money back.
nothing on the car is very old as i have had it six months parked in a garage.
cheers mickyboy
the car has got a fair few bits on it and if iwas to to break it i would get a lot of money back.
nothing on the car is very old as i have had it six months parked in a garage.
cheers mickyboy
15 July 2011, 09:32 PM
#11
looks good mate, i met you in the shell petrol station in maidenhead a few weeks back (i got the blue blobeye sti) , if you do decide to break this at any point give me a PM, very nice spec though
17 July 2011, 06:28 PM
#14
Moderator
iTrader: (4)
Join Date: Jul 2004
Location: The Terry Crews of moderation. P P P P P P POWER!!
Posts: 18,687
Likes: 0
Received 0 Likes
on
0 Posts
No idea mate TBH, but with nice 07 STi hawks now easily going for 12k, even with the nice bits on the car, I'd personally be surprised if anyone gave you more than 8k for one without an engine.
It's probably a borderline scenario whereby it's not quite worth breaking the car for the nice bits, but what you'd actually get for it as it is, isn't worth a great deal more.
You're kinda comitted, I'd really see it though (if you can) if I were you.
It's probably a borderline scenario whereby it's not quite worth breaking the car for the nice bits, but what you'd actually get for it as it is, isn't worth a great deal more.
You're kinda comitted, I'd really see it though (if you can) if I were you.
Last edited by New_scooby_04; 17 July 2011 at 07:44 PM.
calipers
17 July 2011, 06:38 PM
#16
Scooby Regular
Thread Starter
iTrader: (10)
Join Date: Oct 2003
Location: berks
Posts: 1,174
Likes: 0
Received 0 Likes
on
0 Posts
thanks for that new scooby.
the money isnt the reason for not doing the car and nor is it doing all the work as i can do most of it myself. the issue is it will just sit in the garage week in week out and it will owe close to or more than £20000 when done, i can see other uses for that money, (like a good holiday lol)
back to the seriousness i realy dont know what to do, i am in the middle of having a 550 hp power engine built so this could be for sale aswell so could be a good deal for somebody who might want to buy it all, they would just need to buy the ancillaries like a clutch, turbo, uppipe and down pipe for the rotataed set up which i was going for.
cheers mickyboy
the money isnt the reason for not doing the car and nor is it doing all the work as i can do most of it myself. the issue is it will just sit in the garage week in week out and it will owe close to or more than £20000 when done, i can see other uses for that money, (like a good holiday lol)
back to the seriousness i realy dont know what to do, i am in the middle of having a 550 hp power engine built so this could be for sale aswell so could be a good deal for somebody who might want to buy it all, they would just need to buy the ancillaries like a clutch, turbo, uppipe and down pipe for the rotataed set up which i was going for.
cheers mickyboy
