evoscan/sti scan
#1
Scooby Regular
Thread Starter
Join Date: Jul 2010
Location: llanelli, boyo
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
evoscan/sti scan
is anyone using evoscan and the select monitor port to read values from their classic ecu's. i have it connected to my z4 ecu, but have no idea what some of the values i see should be, like 'knock correction' which is in degrees i think.
thanks
thanks
#2
I am giving it a go tonight as I just received my Evoscan cable... I have literally no idea what I am doing but I guess I will figure it out as I go along. JGM's website has a pinout diagram with tolerances for the voltage outputs. That might help.
I think there should be a data logging section on here to help really... if anyone is listening!! LOL
I think there should be a data logging section on here to help really... if anyone is listening!! LOL
#3
Scooby Regular
Thread Starter
Join Date: Jul 2010
Location: llanelli, boyo
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
have you got the software aswell?
dont think you need the pinout thing.
connect ya laptop to the select monitor port under the dash. think its white, down with the green and black test connectors.
dont think you need the pinout thing.
connect ya laptop to the select monitor port under the dash. think its white, down with the green and black test connectors.
#5
Scooby Regular
Thread Starter
Join Date: Jul 2010
Location: llanelli, boyo
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
its easy as to use. ive logged loads. im looking for a netbook to install it on and put it on the dash.
the program even talks to you 'link engaged' n the like, lol.
the program even talks to you 'link engaged' n the like, lol.
#6
Okay got cable and had an initial play, written a bit in General Technical.
So far I have only confirmed that my TPS is fine! Not much!
I will be playing more this weekend including checking the IAM which is supposedly a helpful indicator of how happy the ECU is with the map and fueling etc in general.
Green Dragon - What do you want to achieve from logging? Or just having a look for a laugh?
So far I have only confirmed that my TPS is fine! Not much!
I will be playing more this weekend including checking the IAM which is supposedly a helpful indicator of how happy the ECU is with the map and fueling etc in general.
Green Dragon - What do you want to achieve from logging? Or just having a look for a laugh?
#7
Scooby Regular
Thread Starter
Join Date: Jul 2010
Location: llanelli, boyo
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
i have a z4 ecu and a japanese daughterboard fitted with a switch so i can flick between the 2. as both the maps want 100ron i want to keep an eye on knock etc, this way is cheaper than a knock link and i also get all the other data too. hopefully get a heads up if something is on its way out.
Trending Topics
#8
i have a z4 ecu and a japanese daughterboard fitted with a switch so i can flick between the 2. as both the maps want 100ron i want to keep an eye on knock etc, this way is cheaper than a knock link and i also get all the other data too. hopefully get a heads up if something is on its way out.
Is it possible to log boost pressure?! I am very surprised its not one of the options?!
I found that adding Octane booster to a full tank of 97RON managed to cure the boost retardation. back pretty much to normal now. Will run it right down and then go for some 99RON and new plugs to see if I still get an issue...
Anyone got any hints for extra addresses to map for boost etc?
#10
Thread
Thread Starter
Forum
Replies
Last Post