Andrew Carr Mapping - Good?
#1
Scooby Regular
Thread Starter
Andrew Carr Mapping - Good?
I am interested in an Impreza at the moment which has been mapped by Andrew Carr and is running quite high figures for the engine it has. I would trust the likes of Andy Forrest to have the car running that power safely, but I haven't heard of Andrew Carr so was just wondering if anyone has any experience of using him?
I'd just like to say this is not a slagging post, the only reason I'm unsure is because I haven't heard of the guy. He could be the best mapper in the world for all I know!
Thanks in advance
Alan
I'd just like to say this is not a slagging post, the only reason I'm unsure is because I haven't heard of the guy. He could be the best mapper in the world for all I know!
Thanks in advance
Alan
#4
Scooby Regular
iTrader: (24)
andrew carr has mapped a couple of my cars in the past and all i can say is he knows his stuff, does a very good thorough unrushed job, and overall is a really nice helpful guy.
just remember if your running the car at it's limit it's not always the mappers fault if it goes pop.
just remember if your running the car at it's limit it's not always the mappers fault if it goes pop.
#5
Scooby Regular
Thread Starter
Cheers powerwrx and Tony.
Yes there are some things that could happen that you'd just put down to bad luck, but it's a totally different ball-game when a car is tuned properly. Would be much less weight on my mind.
The car in question is a low mileage(40k ish) Uk Turbo which is meant to be running 325bhp.
andrew carr has mapped a couple of my cars in the past and all i can say is he knows his stuff, does a very good thorough unrushed job, and overall is a really nice helpful guy.
just remember if your running the car at it's limit it's not always the mappers fault if it goes pop.
just remember if your running the car at it's limit it's not always the mappers fault if it goes pop.
The car in question is a low mileage(40k ish) Uk Turbo which is meant to be running 325bhp.
Last edited by GlesgaKiss; 24 July 2009 at 04:40 PM. Reason: Typo
#7
Scooby Regular
iTrader: (24)
Cheers powerwrx and Tony.
Yes there are some things that could happen that you'd just put down to bad luck, but it's a totally different ball-game when a car is tuned properly. Would be much less weight on my mind.
The car in question is a low mileage(40k ish) Uk Turbo which is meant to be running 325bhp.
Yes there are some things that could happen that you'd just put down to bad luck, but it's a totally different ball-game when a car is tuned properly. Would be much less weight on my mind.
The car in question is a low mileage(40k ish) Uk Turbo which is meant to be running 325bhp.
yes good point does help if you have confidence in the map, must have a uprated turbo if it's running 300bhp plus, should be a nice road car once it's finished.
good luck with whatever you decide to do.
Trending Topics
#8
Scooby Regular
Thread Starter
You can either find Andrew on here or most likely he is here Lancashire and District Subaru Owners Club
Tony
Tony
Has a VF35 IIRC.
#10
Scooby Regular
Join Date: Aug 2008
Location: west yorkshire
Posts: 1,999
Likes: 0
Received 0 Likes
on
0 Posts
Another vote for Andrew here, he has remapped my 02 wrx with full decat and panel filter to 286/308 @ 1.45bar.
I will be going back when i get a bigger turbo.
I will be going back when i get a bigger turbo.
Last edited by coops78; 24 July 2009 at 05:38 PM.
#15
Scooby Regular
Join Date: May 2005
Location: Nr Liverpool
Posts: 672
Likes: 0
Received 0 Likes
on
0 Posts
Another thumbs up from me. Andrew mapped my 03 WRX with full decat and panel filter to 284/305. He has also fitted and mapped a SIMTEK onto my MY98 STI. Its currently running a safe map but feels great. A very nice guy who knows his stuff.
Andy.
Andy.
#19
Scooby Regular
Join Date: Dec 2001
Location: Just far enough from sunny Liverpool
Posts: 6,963
Likes: 0
Received 0 Likes
on
0 Posts
Another thumbs up- I've used Andrew several times; always happy to offer advice on mods pre mapping and is happy to spend time explaining stuff too.
Top man
Top man
#20
Scooby Regular
iTrader: (1)
Join Date: Jan 2004
Location: Lancaster/Manchester or stuck in a traffic jam somewhere in between
Posts: 2,232
Likes: 0
Received 0 Likes
on
0 Posts
Andrew = Top bloke, extremely helpful, knowledgeable and he did some mapping my last STi. Any problems I've had, I've always been able to pick up the phone and get really sound solid advice.
Once I've got my new motor, I'm planning on getting a SimTek Ecu & mapping from Andrew. Wouldnt go to anyone else nowadays, theres no need to (and I have previously used Andyf prior to Andrew getting involved more seriously on the mapping front)
Once I've got my new motor, I'm planning on getting a SimTek Ecu & mapping from Andrew. Wouldnt go to anyone else nowadays, theres no need to (and I have previously used Andyf prior to Andrew getting involved more seriously on the mapping front)
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Sambob
Engine Management and ECU Remapping
41
27 November 2015 07:36 PM