what version is my97 uk turbo?
#5
they are white with a carbon fibre surround. ive just bught a blitz supersound and the bloke said it will fit any classic where they bolt onto the front of the intercooler! this true
#6
#7
V1-6 only applies to the jdm sti's.
As your car is a UK Turbo, it is simply a UK Turbo.
As per other thread comment - fit a standard re-circ valve.
If you're after the stupid sound, then I'm sure the Blitz will suffice.
As your car is a UK Turbo, it is simply a UK Turbo.
As per other thread comment - fit a standard re-circ valve.
If you're after the stupid sound, then I'm sure the Blitz will suffice.
Trending Topics
#8
Scooby Regular
iTrader: (1)
Join Date: Jan 2008
Location: France
Posts: 1,695
Likes: 0
Received 0 Likes
on
0 Posts
Standard valve doesn’t mess up the fuelling giving a much smoother throttle response I removed my VTA and will never use on again like driving a different car.
Last edited by rbaz; 21 November 2008 at 04:30 PM.
#11
Scooby Regular
OK,
Does you dashboard have a little cubby hole in the centre above the air vents?
Does your passenger side dashboard have an air bag?
Do you have an arm rest?
If you have these things your car is probably V4 onwards. If so its unlikely this DV will fit because IIRC your version intercooler has a pipe welded in place that feeds the OE DV.
If you car does not have any of these things on the dash then it has the old style dash and is therefore a V3. If this is the case, again that DV will not fit.
The DV on the ebay advert is for MY99/00 and might fit newage WRX
Does you dashboard have a little cubby hole in the centre above the air vents?
Does your passenger side dashboard have an air bag?
Do you have an arm rest?
If you have these things your car is probably V4 onwards. If so its unlikely this DV will fit because IIRC your version intercooler has a pipe welded in place that feeds the OE DV.
If you car does not have any of these things on the dash then it has the old style dash and is therefore a V3. If this is the case, again that DV will not fit.
The DV on the ebay advert is for MY99/00 and might fit newage WRX
#12
right, cheers for the replys. i should of researched it first. ive just rang up scoobyparts and they have a forge dumpvalve in stock which WILL fit mine!
are these any good??
are these any good??
#13
Scooby Regular
iTrader: (27)
Post a pic of your engine bay and I'm sure your question will be answered. I must admit its unlikely to fit . I have a Bailey on mine and have no trouble at all with it
**waits for barrage of abuse **
Mines an MY97 uk turbo (v3 equivalent, black dials, no cubbyhole etc) BTW
**waits for barrage of abuse **
Mines an MY97 uk turbo (v3 equivalent, black dials, no cubbyhole etc) BTW
#14
well to be honest mate i thought my baileys was all good up until earlier when they told me i have a leak in my boost, so i think its my dump valve but will find out tomorrow morning after i have picked my forge one up!
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM