mellinator

Guys I need your help.

Im trying to remove my headlights to de tango them.

The de tango bit is fine but i cant seem to work out how the headlights come out.

I can see the top two screws but after that im lost.

Has anybody got a detailed diagram or run through of how to do this?

thank you

phil_wrx

iTrader: (2)

unclip grill and remove it, u will see some round circular clips, pop them out and remove the little segments, lights bolt on at top and then if i remember right there is a screw at the bottom left.

Aztec Performance Ltd

iTrader: (234)

https://www.scoobynet.com/lighting-o...it-bugeye.html

mellinator

cheers lads superb

mellinator

guys

i have removed the headlights,

removed all the bulbs.

before they go into the oven for 20 mins, i have a couple of questions.

what temp for the oven?
How far back do the lights need to be stripped?
ie DO I have to take the black casing off the lights( the bit that holds the lights onto the car?)
Im just scared of fecking it up

aNY HELP AT THIS STAGE WOULD BE GREAT.

THANKS

mellinator

At the moment the lights are exactly as they were removed from the bug eye car apart from the bulbs have been all taken out.
van they go straight into the oven like that?

mellinator

can anybody help?? please

speedking

Try this thread and this one. HTH