What power will i get ? have a guess
10 June 2007, 09:46 AM
#1
Scooby Regular
Thread Starter
Join Date: Jul 2005
Location: west drayton middlesex
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
What power will i get ? have a guess
Going on the rolling road friday with my new turbo to
Get it maped to my car.
Just for fun everyone have a guess what power & torque
i will get.
The car is a 99uk turbo mods done:
Vf22 turbo,boost will be 17psi to be safe.*
3in Decat stainless steel exhaust system,
power engineering down pipe and middle pipe,
6x4 magnex back box.
Tek2 remap by ecutek.
Sti intercooler.
K&N panel filter.
Magnecore spark plug cable 8.5.
Bailey dv26si evo twin piston dump valve.
Samco silicon intercooler hose set.
Exedy 230mm clutch kit.*
Exedy lightweight flywheel 5.8kgs *
Roger clark lightweight pulleys. *
Walbro 255lph fuel pump.*
On my old tdo4l turbo without the * mods.
my best was 275bhp at 5720rpm & 276lbs peak torque.
Get it maped to my car.
Just for fun everyone have a guess what power & torque
i will get.
The car is a 99uk turbo mods done:
Vf22 turbo,boost will be 17psi to be safe.*
3in Decat stainless steel exhaust system,
power engineering down pipe and middle pipe,
6x4 magnex back box.
Tek2 remap by ecutek.
Sti intercooler.
K&N panel filter.
Magnecore spark plug cable 8.5.
Bailey dv26si evo twin piston dump valve.
Samco silicon intercooler hose set.
Exedy 230mm clutch kit.*
Exedy lightweight flywheel 5.8kgs *
Roger clark lightweight pulleys. *
Walbro 255lph fuel pump.*
On my old tdo4l turbo without the * mods.
my best was 275bhp at 5720rpm & 276lbs peak torque.
Trending Topics
also been to one or two rolling road days 
.
.
14 June 2007, 12:56 PM
#10
Scooby Regular
Thread Starter
Join Date: Jul 2005
Location: west drayton middlesex
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
Got fitted in today, Car ran well it made 301bhp at 5610rpm and 309lbs on
17psi, cars running great feels like new.
If i wanted more power need bigger injecters,but very happy
.
17psi, cars running great feels like new.
If i wanted more power need bigger injecters,but very happy
.
16 June 2007, 01:48 PM
#11
Scooby Regular
Thread Starter
Join Date: Jul 2005
Location: west drayton middlesex
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
Had it back on the rolling road again today, maf airflow cencer went wrong.
Funny how power runs are different, car made 306bhp at 5555rpm and
300lbs/ft peak Torque, Where it made 301bhp at 5610rpm and 309lbs/ft Torque.
Still very happy being its 300+
Funny how power runs are different, car made 306bhp at 5555rpm and
300lbs/ft peak Torque, Where it made 301bhp at 5610rpm and 309lbs/ft Torque.
Still very happy being its 300+
16 June 2007, 03:52 PM
#13
Scooby Regular
Thread Starter
Join Date: Jul 2005
Location: west drayton middlesex
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
The thing is mate it,s a uk scooby it was only 215bhp and 215ft torque when i got it.
It,s up to 306bhp+300ft torque.
Thats 91bhp and 85ft torque, But its not just about the turbo power
its how long and much i can use now.
Before on the old TD04l turbo it run out of puff about 5950rpm now it go,s
to the redline 7000rpm and on, with up to 38-40bhp more across the rev range than before.
It,s only 1235kgs where most m3s, auldis,and evo,s are around 1500kgs
So 300bhp is very quick.
It,s up to 306bhp+300ft torque.
Thats 91bhp and 85ft torque, But its not just about the turbo power
its how long and much i can use now.
Before on the old TD04l turbo it run out of puff about 5950rpm now it go,s
to the redline 7000rpm and on, with up to 38-40bhp more across the rev range than before.
It,s only 1235kgs where most m3s, auldis,and evo,s are around 1500kgs
So 300bhp is very quick.
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM