What power will i get ? have a guess
Going on the rolling road friday with my new turbo to
Get it maped to my car. Just for fun everyone have a guess what power & torque i will get. The car is a 99uk turbo mods done: Vf22 turbo,boost will be 17psi to be safe.* 3in Decat stainless steel exhaust system, power engineering down pipe and middle pipe, 6x4 magnex back box. Tek2 remap by ecutek. Sti intercooler. K&N panel filter. Magnecore spark plug cable 8.5. Bailey dv26si evo twin piston dump valve. Samco silicon intercooler hose set. Exedy 230mm clutch kit.* Exedy lightweight flywheel 5.8kgs * Roger clark lightweight pulleys. * Walbro 255lph fuel pump.* On my old tdo4l turbo without the * mods. my best was 275bhp at 5720rpm & 276lbs peak torque. |
What did it make then bud ??
:) |
He said it's friday and he posted today so i'm assuming it's in 5 days time
i'll guess around 325 bhp |
How much torque do you think ?.
And yes friday the 15th, sorry should have put the date. |
Id say 310/300.......... but im not normally correct.
still on the standard 440's then? |
312/289
Tony |
Is there a prize for this by the way? lol
Your figures seem very specific compared to mine Tony...... been there before? |
Originally Posted by rigga
(Post 7006711)
Your figures seem very specific compared to mine Tony...... been there before?
will also depend on who maps it and at which rolling road :rolleyes: Tony |
Yes mate still have the 440s.
The wife has said,no more money to go on the scooby :(. This month that is :norty:. |
Got fitted in today, Car ran well it made 301bhp at 5610rpm and 309lbs on
17psi, cars running great feels like new. If i wanted more power need bigger injecters,but very happy :D . |
Had it back on the rolling road again today, maf airflow cencer went wrong.
Funny how power runs are different, car made 306bhp at 5555rpm and 300lbs/ft peak Torque, Where it made 301bhp at 5610rpm and 309lbs/ft Torque. Still very happy being its 300+:D |
only 300hp after all those mods....
I thought scoobies were meant to tune easily |
The thing is mate it,s a uk scooby it was only 215bhp and 215ft torque when i got it.
It,s up to 306bhp+300ft torque. Thats 91bhp and 85ft torque, But its not just about the turbo power its how long and much i can use now. Before on the old TD04l turbo it run out of puff about 5950rpm now it go,s to the redline 7000rpm and on, with up to 38-40bhp more across the rev range than before. It,s only 1235kgs where most m3s, auldis,and evo,s are around 1500kgs So 300bhp is very quick. |
All times are GMT +1. The time now is 01:04 AM. |
© 2024 MH Sub I, LLC dba Internet Brands