Gauge Pods?
30 December 2006, 12:58 PM
#1
Scooby Regular
Thread Starter
Join Date: Mar 2005
Location: Belfast, Northern Ireland
Posts: 1,223
Likes: 0
Received 0 Likes
on
0 Posts
Gauge Pods?
I have to change my boost gauge, and as im currently running the one from subaru, the 35mm pod one that mounts on the steering shrouding, i was trying to find a 35mm one that would fit. Ive been unable to
So ive decided to go for a 52mm guage, and what im wondering is has anyone made a pod that would replace the center air vents on an 02 STI?
Cheers for you help
So ive decided to go for a 52mm guage, and what im wondering is has anyone made a pod that would replace the center air vents on an 02 STI?
Cheers for you help
30 December 2006, 01:04 PM
#2
Ive not seen a centre vent replacemnt for a newage mate.
Many people run a clock replacement pod inc myself.
You could always mount your meters in a din sized plate under youre stereo.
Youre other choices are a custom pod, steerring cowling pod or a pillar pod...
Good luck mate
Many people run a clock replacement pod inc myself.
You could always mount your meters in a din sized plate under youre stereo.
Youre other choices are a custom pod, steerring cowling pod or a pillar pod...
Good luck mate
30 December 2006, 01:24 PM
#3
Scooby Regular
Thread Starter
Join Date: Mar 2005
Location: Belfast, Northern Ireland
Posts: 1,223
Likes: 0
Received 0 Likes
on
0 Posts
cheers, was thinking that, i took the vents out there, and the vents remove from the surround by removing 2 screws, i reckon with a bit of time and patience i should be able to make a plastic plate that could be screwed in place and hold the 2 guages i want in it.
cheers again
cheers again
30 December 2006, 04:30 PM
#4
Scooby Regular
Join Date: Aug 2006
Location: ESSEX ...BORN AND BRED PETROL HEAD....................... MANS BEST FRIEND IS A ENGLISH BULL TERRIER
Posts: 1,666
Likes: 0
Received 0 Likes
on
0 Posts
If you have any problems i could change the vent for you see the link of some of my work
https://www.scoobynet.com/interior-1...ns-needed.html
kips
https://www.scoobynet.com/interior-1...ns-needed.html
kips
31 December 2006, 02:57 PM
#5
Scooby Regular
Thread Starter
Join Date: Mar 2005
Location: Belfast, Northern Ireland
Posts: 1,223
Likes: 0
Received 0 Likes
on
0 Posts
KIPS they look fantastic, would you be interested in a commision project? producing some pods for the newer model car? I could send you over the vents to work with, heres some pics of what i would like to do
the complete unit
the unit with the vents removed, here i would like a pod at either side to hold a 52mm guage
would you have any interest KIPS?
the complete unit
the unit with the vents removed, here i would like a pod at either side to hold a 52mm guage
would you have any interest KIPS?
Thread
Thread Starter
Forum
Replies
Last Post