Gauge Pods?
 

I have to change my boost gauge, and as im currently running the one from subaru, the 35mm pod one that mounts on the steering shrouding, i was trying to find a 35mm one that would fit. Ive been unable to

So ive decided to go for a 52mm guage, and what im wondering is has anyone made a pod that would replace the center air vents on an 02 STI?

Cheers for you help :)

Ive not seen a centre vent replacemnt for a newage mate.

Many people run a clock replacement pod inc myself.

You could always mount your meters in a din sized plate under youre stereo.

Youre other choices are a custom pod, steerring cowling pod or a pillar pod...

Good luck mate :D

http://img.photobucket.com/albums/v2...p-hid10use.jpg

cheers, was thinking that, i took the vents out there, and the vents remove from the surround by removing 2 screws, i reckon with a bit of time and patience i should be able to make a plastic plate that could be screwed in place and hold the 2 guages i want in it.

cheers again

If you have any problems i could change the vent for you see the link of some of my work

https://www.scoobynet.com/interior-1...ns-needed.html

kips:thumb:

KIPS they look fantastic, would you be interested in a commision project? producing some pods for the newer model car? I could send you over the vents to work with, heres some pics of what i would like to do

the complete unit
http://www.a-solutions.biz/pics/vents/vent1.JPG

the unit with the vents removed, here i would like a pod at either side to hold a 52mm guage
http://www.a-solutions.biz/pics/vents/vent2.JPG


would you have any interest KIPS?