GrollySTI

Anyone know if the spec C boot is different to an 05STI boot - ie made of a lighter material?

MJW

AFAIK its just bare metal ie. no sound deadening materials, etc. Also I think the rear windshield is made from thinner glass

GrollySTI

Thanks for the reply but what I mean is...is the boot lid itself made of the same material or not.

Cheers

MJW

The STi bootlid is made from steel whereas the Spec C one is aluminium. This applies to MY05 Spec C's not sure about earlier models.

[edit] this works out at approximately a third of the weight of the steel item

spec-cie

Yep

GrollySTI

Thanks very much.

Now - how to source one??

MJW

Have you tried Litchfield Imports ? I know they import Spec C's so they may be able to get hold of parts for them as well.

Bartop

I'd also be interested in this - also how many holes do they come with

I want one with just the four holes for the WRX spoiler bolts ie with no locator grommets or hole for the stop light wiring..alumininum would be a big bonus at the right price !

scrappy and scooby

i'll let you know about the older spec-cwhen i get mine it a '03 and i pick it up in three weeks! can't wait

paulwrxboro

I think the bugeye wrx are alloy

i may be wrong

MJW

I think the introduction of the aluminium bootlid was on the MY05 model. Check it with a magnet when you get it (aluminium being non-ferrous of course !)

ex-webby

You can have the light weight boot off my Spec-C if you want









But your have to buy the rest of the car to go with it for at least £30k!!!

Regards,
Shaun.

GrollySTI

I'll try that ta.
If thats the case I can just get the 05 one

spec-cie

Most MY05 Spec C's come with a WRX-style low-rise spoiler as standard so I'd guess it would be okay ... I'll check when I get home tonight.

Bartop

In which case it wouldn't be any good - it'll have the four holes for the bolts, plus 2 holes with plastic grommets to locate the spoiler plus a hole for the stop light wire. T

The Spec C Carbon Fibre spoiler option looks like it has a long single foot on each side which uses the 4 bolt holes and covers up the rest but I have an S202 spoiler which has 2 small feet on each side.

Cheers

explore

im sure thay are as i have an 03 and bootlid is very light with no piston thingy please a tell tell sign is no being able to close it very well just like the alloy bonnets

davedipster

I'm sure the 03 sti and WRX have steel boots/Trunks, will try a fridge magnet on it tonight.

My Disneyland fridge magnet sticks, that's confirmed that.

Dipster

Mog

Are you sure you still have the ali bootlid as I thought you had a high level spoiler which the weight of would buckle it.?????

Mog

ex-webby

I do, but I can still get the original lid back.

Regards,
Shaun.

Mog

does that mean the high level spoiler is on a steel bootlid?????

Mog

jasonius

iTrader: (1)

05 WRX must be steel, magnet attracted (just about). However, as stated, it's very light..!

Jason

ex-webby

Mog,

Not sure.

Regards,
Shaun.

Mog

Its very light because the tension bar is matched to the weight of the lid to make it easier to open, anyone who has fitted a high level spoiler to a WRX lid will know how heavy the lid becomes.

Mog

spec-cie

Pics of MY05 Spec C spoiler and bootlid ... looks like four holes to me:

Bartop

Cheers - there's definately a fifth one tho where the cable for the stop light goes through - you can see it on the right. And if it's like the normal WRX there is 2 blue plastic grommets in holes which are revealed once the spoiler is off..
As it happens there are some pics in the gallery at the moment from a guy who has just fitted a DRM spoiler..

GrollySTI

Just for info - the 05 model STI must be steel as the magnet sticks.