where can i get my car de resricted?
22 November 2003, 12:57 PM
#1
Scooby Regular
Thread Starter
Join Date: Nov 2003
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
ive just bought a imported wrx and want to get it de resricted and the dials reading in mph?
ive been told that u dont have to change the dials now....just put this little box somewhere....arent i technical
im in sheffield so if theres anywhere cheapish on somewhere i can buy the kit and diy it.
thanks in advance.
tony.
ive been told that u dont have to change the dials now....just put this little box somewhere....arent i technical
im in sheffield so if theres anywhere cheapish on somewhere i can buy the kit and diy it.
thanks in advance.
tony.
22 November 2003, 05:09 PM
#5
Scooby Regular
Join Date: Aug 2002
Posts: 1,977
Likes: 0
Received 0 Likes
on
0 Posts
does ur current speedo read up to 160/180 ??
u can buy a converter, depending on Year as to which one.
the one i had goes inline with the cable that runs from gearbox to speedo.
it converts to read mph and records in miles.
on the speedo just blank out the "k" in kmh.
job done.
u can buy a converter, depending on Year as to which one.
the one i had goes inline with the cable that runs from gearbox to speedo.
it converts to read mph and records in miles.
on the speedo just blank out the "k" in kmh.
job done.
22 November 2003, 06:54 PM
#6
Scooby Regular
Thread Starter
Join Date: Nov 2003
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
my speedo reads 180 m8....
does that gismo let it go faster too?
check out the link in my earlier post....is that the thing uve got?
ive only done almost 115mph in it so far....im a wuss i know :P
[Edited by tonytone - 11/22/2003 6:56:40 PM]
does that gismo let it go faster too?
check out the link in my earlier post....is that the thing uve got?
ive only done almost 115mph in it so far....im a wuss i know :P
[Edited by tonytone - 11/22/2003 6:56:40 PM]
22 November 2003, 07:04 PM
#7
Scooby Regular
Join Date: Jul 2003
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
if ur in doubt mate go to the scoobyclinic they have just done mine
works a treat
goto
www.scoobyclinic.co.uk
ring them up speak to kev he is the gaffer
also they r in chesterfield not far from u
works a treat
goto
www.scoobyclinic.co.uk
ring them up speak to kev he is the gaffer
also they r in chesterfield not far from u
Trending Topics
23 November 2003, 12:39 AM
#11
Scooby Regular
Thread Starter
Join Date: Nov 2003
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
its a k-reg
what bit is it? and does it make the original speedo read as mph?
and does it also de resrict it?
and maybe u'll know this 2.....whats a wrx's top speed?
its almost standard....just a hks mushroom type filter,hks bov and a full stainless steel exhaust....which i can almost fit my head in
what bit is it? and does it make the original speedo read as mph?
and does it also de resrict it?
and maybe u'll know this 2.....whats a wrx's top speed?
its almost standard....just a hks mushroom type filter,hks bov and a full stainless steel exhaust....which i can almost fit my head in
23 November 2003, 09:44 AM
#12
Scooby Regular
Join Date: Jul 2003
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
it was cheaper than that i think it was 60 +vat
but phone them and ask
it de restricts also makes the kph read as mph so no nead to **** about with ur clocks
ps ive had 150 out of mine but it was still pullin
not quite standard though
but phone them and ask
it de restricts also makes the kph read as mph so no nead to **** about with ur clocks
ps ive had 150 out of mine but it was still pullin
not quite standard though
Thread
Thread Starter
Forum
Replies
Last Post
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM
Adam Kindness
ScoobyNet General
0
15 September 2015 03:31 PM
