ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   ScoobyNet General (https://www.scoobynet.com/scoobynet-general-1/)
-   -   where can i get my car de resricted? (https://www.scoobynet.com/scoobynet-general-1/274257-where-can-i-get-my-car-de-resricted.html)

tonytone 22 November 2003 12:57 PM

ive just bought a imported wrx and want to get it de resricted and the dials reading in mph?
ive been told that u dont have to change the dials now....just put this little box somewhere....arent i technical :D
im in sheffield so if theres anywhere cheapish on somewhere i can buy the kit and diy it.
thanks in advance.
tony.

tonytone 22 November 2003 01:12 PM

http://www.kilburne.com/2410/frames.php

has anyone on here used these guys? they look the biz and cheap cheap cheap!!!!! :D

rossyboy 22 November 2003 04:04 PM

It cost me £150, not from there though. No idea if thats good or bad. The new white dials were an extra £50 and read up to 180mph.

tonytone 22 November 2003 05:00 PM

if i can leave the dials alone....i will.
but if they have to change...white ones are going in :D

Foot_Tapper 22 November 2003 05:09 PM

does ur current speedo read up to 160/180 ??

u can buy a converter, depending on Year as to which one.
the one i had goes inline with the cable that runs from gearbox to speedo.
it converts to read mph and records in miles.

on the speedo just blank out the "k" in kmh.

job done.

tonytone 22 November 2003 06:54 PM

my speedo reads 180 m8....
does that gismo let it go faster too?
check out the link in my earlier post....is that the thing uve got?
ive only done almost 115mph in it so far....im a wuss i know :P

[Edited by tonytone - 11/22/2003 6:56:40 PM]

soakden 22 November 2003 07:04 PM

if ur in doubt mate go to the scoobyclinic they have just done mine
works a treat

goto
www.scoobyclinic.co.uk

ring them up speak to kev he is the gaffer
also they r in chesterfield not far from u

tonytone 22 November 2003 07:14 PM

how much?

wrrjones 22 November 2003 08:16 PM

LET ME NO THE YR AND ILL SUPPLY YOU WITH THE PART TO DO IT AS ITS EASY .....CHRIS

wrrjones 22 November 2003 08:17 PM

no more than 70+vat and post

tonytone 23 November 2003 12:39 AM

its a k-reg
what bit is it? and does it make the original speedo read as mph?
and does it also de resrict it?
and maybe u'll know this 2.....whats a wrx's top speed?
its almost standard....just a hks mushroom type filter,hks bov and a full stainless steel exhaust....which i can almost fit my head in :D

soakden 23 November 2003 09:44 AM

it was cheaper than that i think it was 60 +vat
but phone them and ask
it de restricts also makes the kph read as mph so no nead to **** about with ur clocks
ps ive had 150 out of mine but it was still pullin
not quite standard though

tonytone 23 November 2003 04:16 PM

ill give em a call in the morning....thanks.


All times are GMT +1. The time now is 12:36 PM.


© 2024 MH Sub I, LLC dba Internet Brands