SVA emisions fail
#1
Hi All,
My MY93WRX has just failed on emisions, i got it nice and hot before taking it in.
Basicly has anyone got any sugestions as to what i can do with it, the Lambda and HC tests were fine but the CO was around the .70 mark (.30 is pass) on the fast idle (2600 rpm), but passed fine on the normal idle.
Any ideas ?
(no decat sections as far as i know and the centre pipe looks fairly new)
My MY93WRX has just failed on emisions, i got it nice and hot before taking it in.
Basicly has anyone got any sugestions as to what i can do with it, the Lambda and HC tests were fine but the CO was around the .70 mark (.30 is pass) on the fast idle (2600 rpm), but passed fine on the normal idle.
Any ideas ?
(no decat sections as far as i know and the centre pipe looks fairly new)
#2
Hi Paul,
I added a uk centre, and BB,still using the original wrx downpipe
(which houses the main cat).
That had no probs.
What fuel is in it ??
If your on SUL alone, try adding some OB
[Edited by Foot_Tapper - 7/15/2003 2:16:57 PM]
I added a uk centre, and BB,still using the original wrx downpipe
(which houses the main cat).
That had no probs.
What fuel is in it ??
If your on SUL alone, try adding some OB
[Edited by Foot_Tapper - 7/15/2003 2:16:57 PM]
#3
Hi,
Im running optimax with some OB (stp i think), does the jap centre section not have a cat then ?
Foottapper, is there a cat also in the BB, the BB on mine looks like the std scooby one so i shoudnt really need to change that should i ?
[Edited by pblakeway - 7/15/2003 3:43:07 PM]
[Edited by pblakeway - 7/15/2003 3:43:29 PM]
Im running optimax with some OB (stp i think), does the jap centre section not have a cat then ?
Foottapper, is there a cat also in the BB, the BB on mine looks like the std scooby one so i shoudnt really need to change that should i ?
[Edited by pblakeway - 7/15/2003 3:43:07 PM]
[Edited by pblakeway - 7/15/2003 3:43:29 PM]
Thread
Thread Starter
Forum
Replies
Last Post
DogsofWar
Engine Management and ECU Remapping
16
23 September 2015 07:41 PM