04 fsti replacement hose opinions please
#1
Scooby Newbie
Thread Starter
04 fsti replacement hose opinions please
As I'm having a bit of work done thought now would be a good time to have all the old hoses replaced with silicone. There's not many sg9 kits available ,am I right in thinking I can use 01-05 Impreza hoses? I just want them in black .
I've seen a kit by TT racing that seem too cheap.
Gravity seem very reasonable not sure if their any good.
or should I spend more and buy samco.
As always any input would be appreciated
I've seen a kit by TT racing that seem too cheap.
Gravity seem very reasonable not sure if their any good.
or should I spend more and buy samco.
As always any input would be appreciated
#5
Scooby Newbie
Thread Starter
The following users liked this post:
#6
Scooby Regular
iTrader: (4)
No worries, post 63 https://www.scoobynet.com/1050783-fl...machine-3.html
It was never a perfect fit and you need to pluck up the courage to cut a shiny new hose but it did the job and looked decent. I really wanted the Zerosports one at the time but couldn't get hold of it.
It was never a perfect fit and you need to pluck up the courage to cut a shiny new hose but it did the job and looked decent. I really wanted the Zerosports one at the time but couldn't get hold of it.
#7
Scooby Regular
I have a Samco turbo inlet hose on my 2007 STi.
Yes, paid a small fortune for it, but the quality is very very good. It's a black matt finish stealthy one, looks OEM to the untrained eye.
Yes, paid a small fortune for it, but the quality is very very good. It's a black matt finish stealthy one, looks OEM to the untrained eye.
Trending Topics
#8
Scooby Regular
iTrader: (1)
So the new age will fit then? Was it worth buying ? I don't mind trimming them down or where most of them unsuitable ? And you were left with a lot that didn't fit? Sorry for all the questions but as you have actually done this Im really interested ,as opposed to some of the nonsense I've spent trawling through on the internet. Thanks
I never managed to find a definitive solution, for a full kit.
Its just another one of those annoying questions, what will fit the forester that comes from the Impreza.
Good luck.
#11
Scooby Newbie
Thread Starter
Thanks for all the advice and opinions guys much appreciated as always, this is my fsti there may be other fsti's but this is mine . Never fails to put a smile on my face, got to love a Subaru.
The following users liked this post:
The following users liked this post:
#13
Scooby Regular
have you checked for any kits for a forester 2.5 xt as that’s what it’s based on , the red intercooler piping looks nice so i would not change it , one of my Fsti has blue pipe work top and bottom going to the radiator , it was done in japan , i’m not even sure of the make but i can have a look if you want , are you looking to do all the hoses , being most 2.5 sti engines are the same , then there should in theory be a few options
The following users liked this post:
#14
Scooby Regular
https://samcosport.com/product/fores...5-2003-2007-2/
Pick your colour
https://www.merlinmotorsport.co.uk/p...nt-2-tcs-351-c
The only difference to the list below is the turbo outlet pipe of the Fsti being different/unique.
https://www.subaruforester.org/threa...5/post-1140913
Pick your colour
https://www.merlinmotorsport.co.uk/p...nt-2-tcs-351-c
The only difference to the list below is the turbo outlet pipe of the Fsti being different/unique.
https://www.subaruforester.org/threa...5/post-1140913
Last edited by Don Clark; 13 January 2022 at 02:18 PM.
Thread
Thread Starter
Forum
Replies
Last Post
p1prodrive
Dealer and Third Party Supplier Queries
9
05 August 2005 09:36 PM