Key lock change
#5
Scooby Regular
iTrader: (46)
Ah ok, so you bought a matching set?
Originally Posted by Bean1984
It started of as a bare shell mate so bought parts as I went along so the only original key is the steering column key. Door key is completely different and don't even have a lock in the boot so figured was easier to make it all one matching set
Trending Topics
#8
Scooby Regular
iTrader: (1)
Take the door card off.
Remove the plastic weather sheet.
Lower Window all the way down.
Top left of the door is a ~30mm circular cut-out. Through that is one of the 2 10mm bolts that hold the door handle. Undo it.
Raise the window all the way up.
To the right of the first door handle bolt, is the second 10mm bolt. Undo it. (this is screwing into plastic and may be corroded/snap the plastic threads).
Carefully pull the door handle off from the front.
Disconnect the 2 linkages attached to the door lock - one for central locking the other for opening. You need to rotate the lock.
Done.
Fitting is the reversal.
Remove the plastic weather sheet.
Lower Window all the way down.
Top left of the door is a ~30mm circular cut-out. Through that is one of the 2 10mm bolts that hold the door handle. Undo it.
Raise the window all the way up.
To the right of the first door handle bolt, is the second 10mm bolt. Undo it. (this is screwing into plastic and may be corroded/snap the plastic threads).
Carefully pull the door handle off from the front.
Disconnect the 2 linkages attached to the door lock - one for central locking the other for opening. You need to rotate the lock.
Done.
Fitting is the reversal.
#9
Scooby Regular
MY01/02 Impreza WS manual locks section
#10
Take the door card off.
Remove the plastic weather sheet.
Lower Window all the way down.
Top left of the door is a ~30mm circular cut-out. Through that is one of the 2 10mm bolts that hold the door handle. Undo it.
Raise the window all the way up.
To the right of the first door handle bolt, is the second 10mm bolt. Undo it. (this is screwing into plastic and may be corroded/snap the plastic threads).
Carefully pull the door handle off from the front.
Disconnect the 2 linkages attached to the door lock - one for central locking the other for opening. You need to rotate the lock.
Done.
Fitting is the reversal.
Remove the plastic weather sheet.
Lower Window all the way down.
Top left of the door is a ~30mm circular cut-out. Through that is one of the 2 10mm bolts that hold the door handle. Undo it.
Raise the window all the way up.
To the right of the first door handle bolt, is the second 10mm bolt. Undo it. (this is screwing into plastic and may be corroded/snap the plastic threads).
Carefully pull the door handle off from the front.
Disconnect the 2 linkages attached to the door lock - one for central locking the other for opening. You need to rotate the lock.
Done.
Fitting is the reversal.
Perfect cheers for that mate
Thread
Thread Starter
Forum
Replies
Last Post
pmarch
Security
3
17 August 2004 01:02 PM