When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I want to make a cupple light changes to the ra-r nothing that I cannot swap back easy as keeping this standard to a certain
extent,,, I am however looking to change the mid/ link pipe and Center pipes on the Exhaust... whilst keeping the oe downpipe and
backbox
I’m just wondering where people are recommending, I’m speaking to len at Subaru’s4u and just wondering if anyone has
any other suggestions as to where I can also look for the parts just so I have some options
Option for you a classic full system as your car is twin scroll SHOULD fit on from cat back apart from one hanger. So two bolts and a couple of exhaust rubbers then store the complete exhaust. Lovely car by the way
Option for you a classic full system as your car is twin scroll SHOULD fit on from cat back apart from one hanger. So two bolts and a couple of exhaust rubbers then store the complete exhaust. Lovely car by the way
hi Joe, thanks for that yes I heard that a classic system is a option on these but I’m noting to pull the oe down pipe
or back box just after the mid and Center pipes ...
Not sure if any use to you but I have a scorpion decat centre section I can sell cheap £30
I thought hawk and blob was same but was incorrect and have confirmed item is defo for a Hawkeye, not sure if there are any other differences you’d need to research yourself
It’s great condition, can provide pictures if needed
Not sure if any use to you but I have a scorpion decat centre section I can sell cheap £30
I thought hawk and blob was same but was incorrect and have confirmed item is defo for a Hawkeye, not sure if there are any other differences you’d need to research yourself
It’s great condition, can provide pictures if needed
Is it UK or JDM if its UK unfortunately it won't fit.
I want to make a cupple light changes to the ra-r nothing that I cannot swap back easy as keeping this standard to a certain
extent,,, I am however looking to change the mid/ link pipe and Center pipes on the Exhaust... whilst keeping the oe downpipe and
backbox
I’m just wondering where people are recommending, I’m speaking to len at Subaru’s4u and just wondering if anyone has
any other suggestions as to where I can also look for the parts just so I have some options
any help would be great
mate that is lovely ❤️ Is that what you broke the spec c for?
shes stunning mate, what were fine first differences you noticed mate when going from your spec c to that beauty?
well obviously for me was the visual going from blob to hawk but power wise it’s pretty lively considering it’s stock I guess with
the extra weight saving and all the suspension goodies it handles well,,, my spec c was a motor sport version so built it up over the last 5 years or so,, it’s nice to have a Impreza I can’t do that much to Although was toying with billeting the vf42 but don’t want to lose the original map when returning it back with all the oe equipment
Here's a picture you can doodle on ?
I imagine the "mid pipe" as you call it is very similar to that on the UK Hawk and Hatch but being twinscroll has a slightly different alignment.
Why not speak to Ian Reeve at Hayward and Scott assuming he's still there.
Last edited by Don Clark; 12 June 2020 at 09:13 PM.
Thanks for the input Don,,, I was pondering speaking with H&S as he done the Dp on my old spec c... I spoke to
ian on sat morning and placed a order on the spot.... thankfully he had just had a jdm hawk in for exhaust work so hoping
it all work out ok
11 June 2020, 11:00 AM
Hawk exhaust parts
Although was toying with billeting the vf42 but don’t want to lose the original map when returning it back with all the oe equipment
