Radiator mounting
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Feb 2007
Location: Kent
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
Radiator mounting
I have a Classic Turbo 2000 Wagon registered in Jan 2000. It has air con.
I'm trying to find a replacement radiator. The gap between the mounting points on my radiator is 19 inches. I can only find them with a gap of 21 inches and am told "this radiator will fit all imprezas".
I can't be the only one with this issue.
I'm not keen on having to modify anything myself unless it's relatively straightforward.
Any help would be great.
Thanks.
I'm trying to find a replacement radiator. The gap between the mounting points on my radiator is 19 inches. I can only find them with a gap of 21 inches and am told "this radiator will fit all imprezas".
I can't be the only one with this issue.
I'm not keen on having to modify anything myself unless it's relatively straightforward.
Any help would be great.
Thanks.
#5
Scooby Regular
#6
Scooby Regular
iTrader: (2)
The top bracket is removable anyway and fastens to the actual rad by M6 x 16mm bolts. Mine were seized, so removed by mole grips from the inside, once the heads had sheared off. I then replaced them all with stainless from Screwfix.
http://www.screwfix.com/p/set-screws...-10-pack/69452
http://www.screwfix.com/p/set-screws...-10-pack/69452