Ads78

iTrader: (2)

I have a Classic Turbo 2000 Wagon registered in Jan 2000. It has air con.

I'm trying to find a replacement radiator. The gap between the mounting points on my radiator is 19 inches. I can only find them with a gap of 21 inches and am told "this radiator will fit all imprezas".

I can't be the only one with this issue.

I'm not keen on having to modify anything myself unless it's relatively straightforward.

Any help would be great.

Thanks.

alcazar

iTrader: (2)

Coolant rad, or aircon rad?

My coolant rad came from a local guy, £64 guaranteed two years, and he threw in a couple of decent pipe clips. It's on a 2.5 forged engine running 400+/400+ and is fine.

Where are you measuring?

Ads78

iTrader: (2)

Coolant rad. The distance is the same between the pins at the bottom and the holes in the top of the rad where the brackets attach.

Ads78

iTrader: (2)

Don Clark

http://www.adrad.co.uk/car-radiator/...=2.0&year=2000

alcazar

iTrader: (2)

The top bracket is removable anyway and fastens to the actual rad by M6 x 16mm bolts. Mine were seized, so removed by mole grips from the inside, once the heads had sheared off. I then replaced them all with stainless from Screwfix.

http://www.screwfix.com/p/set-screws...-10-pack/69452