Radiator mounting
I have a Classic Turbo 2000 Wagon registered in Jan 2000. It has air con.
I'm trying to find a replacement radiator. The gap between the mounting points on my radiator is 19 inches. I can only find them with a gap of 21 inches and am told "this radiator will fit all imprezas". I can't be the only one with this issue. I'm not keen on having to modify anything myself unless it's relatively straightforward. Any help would be great. Thanks. |
Coolant rad, or aircon rad?
My coolant rad came from a local guy, £64 guaranteed two years, and he threw in a couple of decent pipe clips. It's on a 2.5 forged engine running 400+/400+ and is fine. Where are you measuring? |
Coolant rad. The distance is the same between the pins at the bottom and the holes in the top of the rad where the brackets attach.
|
|
|
The top bracket is removable anyway and fastens to the actual rad by M6 x 16mm bolts. Mine were seized, so removed by mole grips from the inside, once the heads had sheared off. I then replaced them all with stainless from Screwfix.
http://www.screwfix.com/p/set-screws...-10-pack/69452 |
All times are GMT +1. The time now is 12:45 AM. |
© 2024 MH Sub I, LLC dba Internet Brands