Kinugawa TD06 20G dyno on 2.1
26 July 2015, 12:46 PM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jan 2015
Location: Plymouth
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Kinugawa TD06 20G dyno on 2.1
Hi people just thought i would share my results with a kinugawa turbo,
I have :-
2.1 stroker
EGR delete
650cc injectors
FMIC
Decat
Std headers
3" exhaust throughout
walbro 255
Kinugawa TD0620G
I have :-
2.1 stroker
EGR delete
650cc injectors
FMIC
Decat
Std headers
3" exhaust throughout
walbro 255
Kinugawa TD0620G
Trending Topics
26 July 2015, 03:25 PM
#8
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jan 2015
Location: Plymouth
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
the pic looks good on my screen...?
thats 1.5bar
Im happy with the result as i did not really have a clue what to expect really
and no idea i dont know what an overlay is??
thats 1.5bar
Im happy with the result as i did not really have a clue what to expect really
and no idea i dont know what an overlay is??
26 July 2015, 04:55 PM
#11
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jan 2015
Location: Plymouth
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
I did initially expect over the 400 mark when i was reading up on the turbo before fitting but then i aso heard totally mixed results so i was unsure to what it would make...
but i supose yes it is a low figure for a large turbo as i had 320 on a std td04 as a 2ltr
but i supose yes it is a low figure for a large turbo as i had 320 on a std td04 as a 2ltr
1.5 is a moderate boost level anyway maybe turn the wick up abit
.SJ.
26 July 2015, 07:25 PM
#14
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jan 2015
Location: Plymouth
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
its not my first choice by any means but I did the build unexpectedly after it went pop so i did it cheaply and that turbo came up on here for the right price so i had it.
27 July 2015, 03:11 AM
#16
Hi there
This turbo is pretty laggy on yours,I would suspect TD06 is not really suited for 2.1L,I would rather suspect this turbo will be bit better on 2.5L
Power is bit down,from this turbo I would expect 400bhp as minimum,yours spec looks good and standard headers should be OK beyond 400bhp,but this depends if they're WRX or STI one,if budget allows then Harvey Up pipe with ported headers will be first thing which would help with better spool up as this this turbo is way too laggy for 2.1L
Hope this helps
Thanks,Jura
This turbo is pretty laggy on yours,I would suspect TD06 is not really suited for 2.1L,I would rather suspect this turbo will be bit better on 2.5L
Power is bit down,from this turbo I would expect 400bhp as minimum,yours spec looks good and standard headers should be OK beyond 400bhp,but this depends if they're WRX or STI one,if budget allows then Harvey Up pipe with ported headers will be first thing which would help with better spool up as this this turbo is way too laggy for 2.1L
Hope this helps
Thanks,Jura
28 July 2015, 07:36 AM
#19
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jan 2015
Location: Plymouth
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
next on my list will be six speed as my 5 box is a bit rough as it is atm...
then I would like to see 450 i always told myself id get to this stage and i would call it a day how wrong was i!
better start saving some pennies!
then I would like to see 450 i always told myself id get to this stage and i would call it a day how wrong was i!
better start saving some pennies!
Thread
Thread Starter
Forum
Replies
Last Post
hedgecutter
General Technical
3
25 September 2015 02:35 PM