Noisy V6
#1
Scooby Regular
Thread Starter
Join Date: Aug 2001
Location: Buxton
Posts: 527
Likes: 0
Received 0 Likes
on
0 Posts
Noisy V6
Ive got a Jap import Mazda Bongo/Ford Freda camper van with a 2.5 ltr V6 which on start up from cold makes a clicking tapping noise which almost goes when its warmed up can only hear it when i press the accelerator? Ive added snake oil which frees up stuck lifters and quietens tappets and petrol detox to clean injectors etc but made no difference any ideas?
cheers manners.
cheers manners.
#2
Scooby Regular
Join Date: Jan 2000
Location: Disco, Disco!
Posts: 21,825
Likes: 0
Received 0 Likes
on
0 Posts
I would run flushing oil and then refill it and change the filter at the same time.
If contines then likeyl knackered lifters, are the oil filled?, they may need changing.
The Mitsi 24v 2.5 suffer from weak lifters, made worse by old or thin oil.
If contines then likeyl knackered lifters, are the oil filled?, they may need changing.
The Mitsi 24v 2.5 suffer from weak lifters, made worse by old or thin oil.
Last edited by The Zohan; 09 April 2008 at 06:16 PM.
#4
Scooby Regular
Thread Starter
Join Date: Aug 2001
Location: Buxton
Posts: 527
Likes: 0
Received 0 Likes
on
0 Posts
Hi its had an oil change last month before i picked it up not sure what type though, not sure if it is the tappets as its only got 40k klms on the clock ( no history though) and its more of a clicky knock than a tappet noise which Ive had on other cars.
#5
Scooby Regular
Join Date: Jan 2000
Location: Disco, Disco!
Posts: 21,825
Likes: 0
Received 0 Likes
on
0 Posts
The above advice still applies, if you do not know the type/quality/grade of oil used, was the filter done at the same time, etc.
Might even be a sticking valve, i would flush it and change the oil/filter and see what if any difference this makes otherwise you could be getting into ££££'s
Thread
Thread Starter
Forum
Replies
Last Post
AlexM
General Technical
4
14 August 1999 10:00 AM