Plasma screen TVs?
#1
Scooby Regular
Thread Starter
Join Date: Oct 2000
Location: same time, different place
Posts: 11,313
Likes: 0
Received 4 Likes
on
2 Posts
Sorry, am sure this has been done before...
Am following the mkt with a view to purchase following lottery win. Haven't a clue what's out there, what should I be aware of?
Info I've gleaned so far is:
They have to be carried and mounted with extreme care
Plasma lasts longer than a CRT TV
The decoders (?) keep changing software worryingly often - can this be updated?
Look for functions which they may or may not have (I think the options of switching btwn widescreen, 16:9 etc were one).
Points to an FAQ greatly appreciated.
Thanks
BJH
Am following the mkt with a view to purchase following lottery win. Haven't a clue what's out there, what should I be aware of?
Info I've gleaned so far is:
They have to be carried and mounted with extreme care
Plasma lasts longer than a CRT TV
The decoders (?) keep changing software worryingly often - can this be updated?
Look for functions which they may or may not have (I think the options of switching btwn widescreen, 16:9 etc were one).
Points to an FAQ greatly appreciated.
Thanks
BJH
#2
Scooby Regular
Join Date: Dec 2001
Location: Arborfield, Berkshire
Posts: 12,387
Likes: 0
Received 0 Likes
on
0 Posts
Hmm we have 6 50" Pioneer hi-res ones at work used for monitoring boards (but for Cable, DVD's etc at night). One problem is they have no receiver but I guess in this day and age when everyone has a sky or cable digital box it doesnt matter.
Weve had them just over a year and if anyone tells you they dont suffer from screen burn then they are lying. Admittedly ours never get turned off and are stationary outputs from PC's. However even the TV one has the SKY NEWS logo burnt into the top left corner.
Weve had them just over a year and if anyone tells you they dont suffer from screen burn then they are lying. Admittedly ours never get turned off and are stationary outputs from PC's. However even the TV one has the SKY NEWS logo burnt into the top left corner.
#3
Scooby Regular
Thread Starter
Join Date: Oct 2000
Location: same time, different place
Posts: 11,313
Likes: 0
Received 4 Likes
on
2 Posts
Thanks. I heard something about decoders, but provided you can upgrade them separately, I don't see a problem. Damn silly if you have to chuck a five grand TV just because a black box has been outdated.
Not sure I like the sound of screen burn, but OTOH how long would a CRT last?
Not sure I like the sound of screen burn, but OTOH how long would a CRT last?
#4
I've just bought the Pioneer 50" plasma for home.
Cost £8000 including table stand and tuner module.
Very impressed with it on DVD, lasredisc but Sy can be great at times but a bit hazzy other times.
Cost £8000 including table stand and tuner module.
Very impressed with it on DVD, lasredisc but Sy can be great at times but a bit hazzy other times.
#5
Been looking at this as well. Have a look on www.avforum.com. A lot of information but don't take things to literal or you will never buy anything like me.
Simon
PS. You might want to look at the Arcam FMJ-27 which will do both NTSC and PAL progressive scan output via componet connections. This will produce a very very good picture.
Simon
PS. You might want to look at the Arcam FMJ-27 which will do both NTSC and PAL progressive scan output via componet connections. This will produce a very very good picture.
#6
Scooby Regular
Thread Starter
Join Date: Oct 2000
Location: same time, different place
Posts: 11,313
Likes: 0
Received 4 Likes
on
2 Posts
Is the tuner module (assuming it's the same as the decoder) easily updatable? A friend says Philips are sending him the latest version of their DVD software so it stays up to date... if this is possible, sounds good.
#7
I haven't seen the latest ones so this might no longer apply....
But I was gawping at about a 50'' flat screen TV in John Lewis a year or so ago and for £12000 I thought it was crap.
The screen reacted so slowly that when a football was booted across the pitch it left a white trail behind it for what seemed like .5 sec or so....
But I was gawping at about a 50'' flat screen TV in John Lewis a year or so ago and for £12000 I thought it was crap.
The screen reacted so slowly that when a football was booted across the pitch it left a white trail behind it for what seemed like .5 sec or so....
Trending Topics
#8
My advice would be to go to a specialist retailer. Somebody who has experience of installing and setting them up. The screens are so critical they will quickly highlight poor quality signals and connection leads. Try and get one with a "tuner box" these will give you an easy way to connect sky, DVD etc. You should be pretty future proof if you have scart, component and S-VHS connections.
Again have a good look round. Try and see the same plasma in different shops. You will see what a difference the correct installation can make. It's a bit like suspension. Anybody could bolt the bits together, but it takes an expert to make them work well.
Again have a good look round. Try and see the same plasma in different shops. You will see what a difference the correct installation can make. It's a bit like suspension. Anybody could bolt the bits together, but it takes an expert to make them work well.
#10
I bought a Pioneer 503HDE (50" inc receiver) for £7500 over Xmas (I think they're a bit cheaper these days).
It's ace !
Make sure you buy one with a good contrast ratio, and that does NOT need a fan.
It's ace !
Make sure you buy one with a good contrast ratio, and that does NOT need a fan.
#11
Scooby Regular
iTrader: (1)
Join Date: Dec 2000
Location: Herts.
Posts: 1,727
Likes: 0
Received 0 Likes
on
0 Posts
Is it still true that these plasma screens have a finite lifetime and will usually last a few years only?? Seem to remember people saying this when they first came out and I thought it was a bit of a drawback.
#12
They suffer from burn-in.
They get hot and use loads of power.
Brightness decreases over time, about 50% after 1 year IIRC.
Slow response time.
If one small tube fails, whole screen needs to be replaced as they cannot be repaired.
Dust and dirt can collect inside which cannot be removed - spoils picture.
Buy one if you like but I wouldn't.
They get hot and use loads of power.
Brightness decreases over time, about 50% after 1 year IIRC.
Slow response time.
If one small tube fails, whole screen needs to be replaced as they cannot be repaired.
Dust and dirt can collect inside which cannot be removed - spoils picture.
Buy one if you like but I wouldn't.
#14
I work in the same building as a company called Flatscreenz.
http://www.flatscreenz.com
They sell plasmas, we have 3 in the building including a nice 50", I think either the NEC or Panasonic are the ones to go for.
Talk to David on 01628 481019, let him know I sent you
Quentin
[Edited by Fullonloon - 4/18/2002 10:26:50 AM]
http://www.flatscreenz.com
They sell plasmas, we have 3 in the building including a nice 50", I think either the NEC or Panasonic are the ones to go for.
Talk to David on 01628 481019, let him know I sent you
Quentin
[Edited by Fullonloon - 4/18/2002 10:26:50 AM]
#15
They suffer from burn-in.
They get hot and use loads of power.
Brightness decreases over time, about 50% after 1 year IIRC.
Slow response time.
If one small tube fails, whole screen needs to be replaced as they cannot be repaired.
Dust and dirt can collect inside which cannot be removed - spoils picture.
They get hot and use loads of power.
Brightness decreases over time, about 50% after 1 year IIRC.
Slow response time.
If one small tube fails, whole screen needs to be replaced as they cannot be repaired.
Dust and dirt can collect inside which cannot be removed - spoils picture.
But my plasma is 100hz. (perfect response time)
The screen is "hermetically sealed" to prevent dust ingress onto display area.
It doesn't get hot, and doesn't even need a fan.
The screen life of a Pioneer 50" is estimated to degrade to 50% of original after 8yrs (assuming 8hrs a day, 365 days a year)
#16
Scooby Regular
Thread Starter
Join Date: Oct 2000
Location: same time, different place
Posts: 11,313
Likes: 0
Received 4 Likes
on
2 Posts
SiCotty, avforum address doesn't work, are you sure it's the right one?
I searched and found a few FAQs but they are from plasma sales companies, so all positive. Nice if I could find an objective view with the disadvantages too.
Thanks guys for your sales recommendations but I think delivery out here would be a bit risky for something so fragile!
BJH
I searched and found a few FAQs but they are from plasma sales companies, so all positive. Nice if I could find an objective view with the disadvantages too.
Thanks guys for your sales recommendations but I think delivery out here would be a bit risky for something so fragile!
BJH
#18
Projector TV's have come a long way - enough for me to buy one!
Don't view one from 2 foot away and 2 foot above in a low voltage halogen lit showroom, and you might consider one too! You should get a very decent bit of kit for less than 2K now.
What's v good is that they can optically (rather than digitally) blow up pix to fill the screen if you havent got a pukka 16:9 anamorphic source.
My 40" Tosh is top, but the sound is crap, so get a separate Dolby 5.1 AV amp and speakers. Lovely!
Don't view one from 2 foot away and 2 foot above in a low voltage halogen lit showroom, and you might consider one too! You should get a very decent bit of kit for less than 2K now.
What's v good is that they can optically (rather than digitally) blow up pix to fill the screen if you havent got a pukka 16:9 anamorphic source.
My 40" Tosh is top, but the sound is crap, so get a separate Dolby 5.1 AV amp and speakers. Lovely!
#19
How can a CRT produce a better quality picture than say a 1280p Plasma, given that most DVD discs are usually encoded no greater than 480 lines or 720 lines at the most ?
Sure, a CRT will blur the edges of each pixel, making the image softer.. but that's actually a bad thing if you want to run your PC through it.
[Edited by DavidBrown - 4/18/2002 5:19:08 PM]
Sure, a CRT will blur the edges of each pixel, making the image softer.. but that's actually a bad thing if you want to run your PC through it.
[Edited by DavidBrown - 4/18/2002 5:19:08 PM]
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM