Hoover HNWF 7148
#1
Scooby Regular
Thread Starter
Join Date: Aug 2001
Location: Warrington
Posts: 4,554
Likes: 0
Received 0 Likes
on
0 Posts
Hoover HNWF 7148
Have one of these washer-driers. The buttons on the control panel have pushed back through the front panel. All still work but I can't work out how to get into it to fix it.
The manual tells me how to clean the filter, wipe the door, etc. Does anyone know where I can view a guide to getting into the machine, as I'm sure the repair itself is dead easy.
The manual tells me how to clean the filter, wipe the door, etc. Does anyone know where I can view a guide to getting into the machine, as I'm sure the repair itself is dead easy.
#2
take the lid off - looking at the lid, the plastic strip at the back has three nut headed screws, 7mm, holding it in place - remove screws, remove plastic strip, the lid now slids backwards to reveall innards. the button cluster is held in place by plastic clips, some of these may have broken - but there are two places where u can put screws in.....
alan
alan
#4
Scooby Regular
Thread Starter
Join Date: Aug 2001
Location: Warrington
Posts: 4,554
Likes: 0
Received 0 Likes
on
0 Posts
18 months.
Thanks Albob, all sorted this afternoon. Luckily I have a 7mm socket I hate it when companies use plastic clips cos it makes the manufacturing easy. Had to cut down two self-tapping screws, they're in there now, better than new
Thanks Albob, all sorted this afternoon. Luckily I have a 7mm socket I hate it when companies use plastic clips cos it makes the manufacturing easy. Had to cut down two self-tapping screws, they're in there now, better than new
Thread
Thread Starter
Forum
Replies
Last Post